User manual LG 37LS570S

[. . . ] Stock (Paper) Cover : Coated paper , S/W 150 g/ Inside : Uncoated paper , 60 g/ 4. ) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. [. . . ] Y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. Y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. use an extension cable that supports USB 2. 0 if the USB cable or USB memory stick does not fit into your TV's USB port. Polishing cloth (Depending on model) Use this to remove dust from the cabinet. B-9) Cinema 3d Glasses The number of 3D glasses may differ depending on the model or country. Y Antenna Isolator Installation Guide - Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. » If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. - You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. it is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. avoid disconnecting the antenna Isolator after installation. - Before starting, be sure that the TV antenna is connected. "Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)" When applying the RF Isolator, a slight loss of signal sensitivity can occur. Separate purchase items can be changed or modified for quality improvement without any notification. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer's circumstances or policies. Description Scrolls through the saved programmes. B type buttons are touch sensitive and can be operated through simple touch with your finger. Y You can set the power indicator light to on or off by selecting OpTiON in the main menus. Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. [. . . ] Y Optical Digital Audio Out is not available when connecting a headphone. English Transmits the video and audio signals from an external device to the TV set. connect the external device and the TV set with the euro scart cable as shown. To display images by using progressive scan, make sure to use the euro scart cable. [. . . ]