User manual LG 40UH630V

[. . . ] Please read this manual carefully before operating your set and retain it for future reference. Com P/NO : MFL69311714(1606-REV04) Printed in Korea Safety instructions Please read these safety precautions carefully before using the product. WARNING ENGLISH Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth. [. . . ] When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock. You may find different brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. never use glass cleaner , car or industrial shiner , abrasives or wax , benzene , alcohol etc. Avoid displaying a fixed image on the TV screen for a long period of time. When moving or unpacking the product, work in pairs because the product is heavy. generated Sound Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. €œCracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. This generated sound does not affect the performance and reliability of the product. Do not use high voltage electrical goods near the TV (e. If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. 7 Preparing NOTE If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. (Depending on model) Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. Wind the power cord on the ferrite core once. [. . . ] (Depending on model) 15 Starts to record and displays record menu. (Only Time MachineReady supported model) (Depending on model) 15 By zooming in on the selected area, you can view it in full screen. Coloured buttons These access special functions in some menus. : Red, : Green, : Yellow, : Blue) ( 14 External control device setup To obtain the external control device setup information, please visit www. [. . . ]