User manual LG 42LA691S

[. . . ] (If they are not fastened securely enough, the TV may tilt forward after being installed. ) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Stand Base 2 NOTE yy Removing the protective film (from the bottom) (Depending on model) Protective film is temporarily attached to prevent the surface of the product from being damaged during delivery. Once the TV has been installed, please remove the protective film on the bottom of the unit as shown in the figure. [. . . ] If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. -- Before starting, be sure that the TV antenna is connected. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. €Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” W  hen applying the RF Isolator, a slight loss of signal sensitivity can occur. 16 ASSEMBLING AND PREPARING Separate purchase (Depending on model) Separate purchase items can be changed or modified for quality improvement without any notification. These devices only work with certain models. ENGLISH ENG 123 P AG-F***DP Dual play glasses AG-F*** Cinema 3D Glasses AN-MR400 Magic Remote AN-WF100 Wi-Fi Dongle AN-VC4** Video call camera LG Audio device Tag On Tag on LA62**, LA64**, LA66**, LA69**, LA74** • (Depending on model) • • • (Depending on model) • • (Depending on model) • (Depending on model) • • • • Compatibility AG-F***DP Dual play glasses AG-F*** Cinema 3D Glasses AN-MR400 Magic Remote AN-WF100 Wi-Fi Dongle AN-VC4** Video call camera LG Audio device Tag On LN57** The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. ASSEMBLING AND PREPARING 17 Parts and buttons A type : LA62**, LA64**, LA66**, LN57**-ZE/ZK Screen ENGLISH ENG B type : LA69**, 42/47/55LA74** Buttons Screen Buttons OK SETTINGS INPUT OK SETTINGS INPUT Speakers Speakers Remote control sensor LG Logo Light Remote control sensor LG Logo Light (Only LA64**, LA66**) Power Indicator (Only LA62**, LN57**-ZE/ZK) C type : 60LA74** Screen Buttons D type : LN57**-ZA Screen Buttons OK SETTINGS INPUT OK SETTINGS Speakers Speakers INPUT Button OK SETTINGS INPUT S USB IN Remote control sensor LG Logo Light 3 USB Appps Remote control sensor Power Indicator Description Scrolls H through the saved programmes. Accesses the main menu, or saves your input and exits the menus. Connect the Kensington security system cable between the TV and a table. 2 EA , P4 x 8 (Only 47/50LN57**-ZE/ZK , 47/50LA62** , 47/50L A64** , 47/50LA66**) 2 EA , M4 x 8 (Only 32/39/42LN57**-ZE/ZK , 32/39/42LA62** , 32/42LA64** , 32/42LA66**)  20 ASSEMBLING AND PREPARING NOTE (Only 32/39/42/47/50LN57**-ZE/ZK , 32/39/42/47/50LA62** , 32/42/47/50LA64** , 32/42/47/50LA66**) How to fix the TV to a table 1. Connect the Desk-mount Cables to the Stand Base using the Bracket Screws. Fix the Desk-mount Cables to a table using the Desk-mount Screws. Once the TV is fixed, move the table close to the wall. Adjusting the angle of the TV to suit view (This feature is not available for all models. ) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. (Only LA62**, LA64**, LA66**, LN57**-ZE/ZK) ENGLISH ENG 15 15 WARNING yy To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 42/47LA69**, 42/47LA74**) 10 10 Swivel 8 degrees to the left or right and adjust the angle of the TV to suit your view. [. . . ] NOTA H/P OUT (*Not Provided) English Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. Impedenza cuffie: 16 Ω yy Uscita audio max delle cuffie: da 9 mW a 15 yy mW Dimensioni jack per cuffia: 0, 35 cm yy NOTE AUDIO menu items are disabled when yy connecting a headphone. When changing AV MODE with a headphone yy connected, the change is applied to video but not to audio. [. . . ]