User manual LG 42LM345S

[. . . ] Model Description Model Suffix LM61-Z/LM58-Z/LS56-Z/CM96-Z EU/PI Brand Product name Creator In charger Yang Cheol-min DD/MM/YY 17/01/12 Adviser Shin Hye-jung 17/01/12 Approver Kim Jong-ok 17/01/12 LG 32/37/42/47/55LM580T Part number MFL67416302 (1207-REV03) 2. Stock (Paper) 2 yy Cover : Coated paper , S/W 150 g/m 2 yy Inside : Uncoated paper , 백상지 60 g/m 4. ) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. [. . . ] If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. -- Before starting, be sure that the TV antenna is connected. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. €Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” W  hen applying the RF Isolator, a slight loss of signal sensitivity can occur. Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buying these items. These devices only work with certain models. AG-F2**, AG-F3**, AG-F4** Cinema 3D Glasses Compatibility AG-F2**, AG-F3**, AG-F4** Cinema 3D Glasses 32/37/42/47/55LM61**, 32/42/47LM58**, 32/42LM34**, 47CM96** 32/37/42/47LS56** • The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. 16 ASSEMBLING AND PREPARING Parts and buttons A type : 32/37/42/47/55LM61**, 32/42/47LM58**, 32/42LM340*, 32/37/42/47LS56** Screen B type : 47CM96** buttons ENGLISH ENG Screen Remote control and intelligent sensors1 Power indicator Speakers Touch buttons2 OK SETTINGS INPUT OK Speakers Remote control and intelligent sensors1 Power indicator SETTINGS INPUT C type : 42LM345* Screen buttons OK OK SETTINGS INPUT Speakers Remote control and intelligent sensors1 Power indicator SETTINGS INPUT buttons H H Description Scrolls through the saved programmes. Accesses the main menu, or saves your input and exits the menus. OK SETTINGS INPUT /I 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 A type buttons are touch sensitive and can be operated through simple touch with your finger. NOTE yy You can set the power indicator light to on or off by selecting OPTION in the main menus. ASSEMBLING AND PREPARING 17 Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Yy When transporting a large TV, there should be at least 2 people. Yy When transporting the TV by hand, hold the TV as shown in the following illustration. Y ENGLISH ENG CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen. Yy It is recommended to move the TV in the box or packing material that the TV originally came in. Yy Before moving or lifting the TV, disconnect the power cord and all cables. Yy When holding the TV, the screen should face away from you to avoid damage. [. . . ] When changing AV MODE with a headphone yy connected, the change is applied to video but not to audio. When changing AV MODE with a headphone yy connected, the change is applied to video but not to audio. Optical Digital Audio Out is not available yy when connecting a headphone. Yy When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART cable. [. . . ]