User manual LG 42LM860V

[. . . ] Stock (Paper) - Cover : Coated paper, S/W 150 g/㎡ - Inside : Uncoated paper, 백상지 60 g/㎡ 4. ) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. [. . . ] “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” When applying the RF Isolator, a slight loss of signal sensitivity can occur. 16 ASSEMBLING AND PREPARING Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. These devices only work with certain models. ENGLISH ENG P AN-MR300 Magic remote control AG-F2**, AG-F3** Cinema 3D glasses AG-F2**DP, AG-F3**DP Dual play glasses AN-WF100 Wireless LAN Compatibility AN-MR300 Magic remote control AG-F2**, AG-F3** Cinema 3D glasses AG-F2**DP, AG-F3**DP Dual play glasses AN-WF100 Wireless LAN 47/55LM96** 72LM95** 42/47/55LM86** • • • • • • • • • • The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. Accesses the main menu, or saves your input and exits the menus. Buttons 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. NOTE yy You can set the power indicator light to on or off by selecting OPTION in the main menus. 18 ASSEMBLING AND PREPARING Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should be yy at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. ENGLISH ENG CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen. It is recommended to move the TV in the box yy or packing material that the TV originally came in. Before moving or lifting the TV, disconnect the yy power cord and all cables. When holding the TV, the screen should face yy away from you to avoid damage. When transporting the TV, do not expose the yy TV to jolts or excessive vibration. When transporting the TV, keep the TV yy upright, never turn the TV on its side or tilt towards the left or right. Whenever you handle TV, Protection pad yy should be covered with side of TV. (Depending on model) Hold the top and bottom of the TV frame firmly. Yy Make sure not to hold the transparent part, speaker, or speaker grill area. Protection pad ASSEMBLING AND PREPARING 19 Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. [. . . ] Connect the external device and the TV with the headphone as shown. NOTE AUDIO menu items are disabled when yy connecting a headphone. When changing AV MODE with a headphone yy connected, the change is applied to video but not to audio. Optical digital audio out is not available when yy connecting a headphone. [. . . ]