User manual LG 42LM860W

[. . . ] Com A-2 TABLE OF CONTENTS TABLE OF CONTENTS A-3 SETTING UP THE TV A-3 A-7 Attaching the stand Tidying cables COMMON language list English Svenska Norsk Dansk Suomi LANGUAGE B-1 MAKING CONNECTIONS B-1 B-2 B-2 B-4 B-6 B-7 B-8 B-9 B-10 B-13 B-15 B-16 B-17 Antenna connection Satellite connection HDMI connection - ARC (Audio Return Channel) DVI to HDMI connection MHL connection RGB-PC connection Component connection Composite connection Euro scart connection Audio connection - Digital optical audio connection USB connection CI module connection Headphone connection B-22 SPECIFICATIONS COMMON SETTING UP THE TV A-3 SETTING UP THE TV Image shown may differ from your TV. Attaching the stand 47/55LM96** 1 Stand body 4 EA M4 x 20 4 4 EA M4 x 20 Front Stand base Top View 2 Stand rear cover 3 CAUTION yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed. Yy not use too much force and over tighten Do the screws; otherwise screw may be damaged and not tighten correctly. [. . . ] Buttons 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. NOTE yy can set the power indicator light to on or off by selecting OPTION in the main menus. description Scrolls through the saved programmes. When transporting a large TV, there should be yy at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. ENGLISH ENG CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen. It yy is recommended to move the TV in the box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect the yy power cord and all cables. When holding the TV, the screen should face yy away from you to avoid damage. When transporting the TV, do not expose the yy TV to jolts or excessive vibration. When transporting the TV, keep the TV yy upright, never turn the TV on its side or tilt towards the left or right. Whenever you handle TV, Protection pad yy should be covered with side of TV. (Depending on model) Hold the top and bottom of the TV frame firmly. Yy Make sure not to hold the transparent part, speaker, or speaker grill area. Protection pad ASSEMBLING AND PREPARING 19 Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Securing the TV to a wall This feature is not available for all models. ENGLISH ENG 10 cm m 10 c 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION yy not place the TV near or on sources of Do heat, as this may result in fire or other damage. Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. [. . . ] Connect the external device and the TV with the headphone as shown. NOTE AUDIO menu items are disabled when yy connecting a headphone. When changing AV MODE with a headphone yy connected, the change is applied to video but not to audio. Optical digital audio out is not available when yy connecting a headphone. [. . . ]