User manual LG 42LS5700

[. . . ] OWNER'S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. LS57** LS58** www. lg. com 2 TABLE OF CONTENTS TABLE OF CONTENTS 3 3 4 10 10 10 13 14 15 16 16 17 18 19 28 28 ENVIRONMENTAL INFORMATION WEEE ENGLISH ENG 29 LICENSES OPEN SOURCE SOFTWARE NOTICE SAFETY INSTRUCTIONS INSTALLATION PROCEDURE ASSEMBLING AND PREPARING Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables SPECIFICATIONS 20 20 21 22 22 23 23 24 24 24 MAKING CONNECTIONS Antenna connection HDMI connection DVI to HDMI connection RGB-PC connection Component connection Composite connection Audio connection - Digital optical audio connection USB connection 25 26 27 27 27 27 REMOTE CONTROL USING THE USER GUIDE MAINTENANCE Cleaning your TV - Screen, frame, cabinet and stand - Power cord WARNING y If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION y If you ignore the caution message, you may be slightly injured or the product may be damaged. 27 TROUBLESHOOTING NOTE y The note helps you understand and use the product safely. Please read the note carefully before using the product. LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 LICENSES Supported licenses may differ by model. For more information about licenses, visit www. lg. com. Manufactured under license from Dolby Laboratories. [. . . ] 25) Wall mount inner spacers 4EA (See p. 19) Owner's manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Component video cable (See p. 23) Cable holder (Depending on model) (See p. 23) Power Cord Desk-mount Screw (Only 32/42/47LS57**, 42LS58**) (See p. 17) or Isolator (Depending on model) (See p. 16) 12 ASSEMBLING AND PREPARING ENGLISH ENG NOTE y Antenna Isolator Installation Guide - Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. » If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. - You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. - Before starting, be sure that the TV antenna is connected. Connect to TV. or Cable / Antenna Isolator 2. Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. "Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)" When applying the RF Isolator, a slight loss of signal sensitivity can occur. ASSEMBLING AND PREPARING 13 Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. These devices only work with certain models. ENGLISH ENG P AN-MR300 Magic Remote Control AN-WF100 Wireless LAN The model name or design may be changed depending on the upgrade of product functions, manufacturer's circumstances or policies. 14 ASSEMBLING AND PREPARING Parts and buttons Screen ENGLISH ENG H OK SETTINGS INPUT Remote control and intelligent sensors1 Power indicator Speakers OK SETTINGS INPUT Touch buttons2 Touch button Description Scrolls through the saved programmes. Adjusts the volume level. OK SETTINGS INPUT /I 1 2 Selects the highlighted menu option or confirms an input. Accesses the main menu, or saves your input and exits the menus. Turns the power on or off. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. All of the buttons are touch sensitive and can be operated through simple touch with your finger. NOTE y You can set the power indicator light to on or off by selecting OPTION in the main menus. ASSEMBLING AND PREPARING 15 Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLISH ENG CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen. y It is recommended to move the TV in the box or packing material that the TV originally came in. [. . . ] y Do not use any chemicals as this may damage the product. If water enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. TROUBLESHOOTING Problem Cannot control the TV with the remote control. No image display and no sound is produced. Solution y Check the remote control sensor on the product and try again. [. . . ]