User manual LG 47LB5820

[. . . ] Please read this manual carefully before operating your set and retain it for future reference. νικά Slovenščina LANGUAGE B-1 SPECIFICATIONS COMMON SETTING UP THE TV A-3 SETTING UP THE TV Image shown may differ from your TV. 28LB49**-ZH 1 Attaching the stand 22LB49**-ZH 1 2 B stand base A stand base B stand base A stand base 2 2EA M4 x L10 A-4 SETTING UP THE TV LB49**-ZB/ZG LB57**, LB58**-ZA/ZB/ZG/ZJ 1 1 A stand base B stand base 2 Stand Base 2 M4 x L14 M4 x L20 (Only 32LB57**, 32LB58**-ZA/ZB/ ZG/ZJ) 4EA SETTING UP THE TV A-5 32/39LB58**-ZM 1 3 1 4EA M4 x L20 2EA M4 x L20 42/47/50/55/60LB58**-ZM Stand Body 1 Stand Base 2 1 4EA M4 x L20 Stand Body Stand Base A-6 SETTING UP THE TV 2 CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. NOTE yy The Rubber will protect the opening from accumulating dust and dirt. [. . . ] Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund. Generated Sound yy “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. This generated sound does not affect the performance and reliability of the product. ASSEMBLING AND PREPARING 9 NOTE yy Image shown may differ from your TV. Yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. Yy The available menus and options may differ from the input source or product model that you are using. Yy New features may be added to this TV in the future. Yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. Yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. ENGLISH ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION yy Do not use any unapproved items to ensure the safety and product life span. Yy Any damage or injuries caused by using unapproved items are not covered by the warranty. Yy Some models have a thin film attached on to the screen and this must not be removed. NOTE yy The items supplied with your product may vary depending on the model. Yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. [. . . ] If water enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. 22 TROUBLESHOOTING / SPECIFICATIONS TROUBLESHOOTING Problem Cannot control the TV with the remote control. no image display and no sound is produced. [. . . ]