User manual LG 500-48799511-0

[. . . ] Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture Industry Canada requirement This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC COMPLIANCE STATEMENT Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] These unreadable discs may need to be read using the CD-R/RW drive they were created with * The disc written using the CD-R/RW drive might not be readable by CD-ROMs other than Multi-read compatible (UDF compatible) CD-ROMs Multiread compatible (UDF compatible) CD-ROMs are: 1. CD-ROMs that support Packet Write. Please note: Certain software (i. e. particularly those including Video playback) may require a considerably increased specification PC to give acceptable results. While this Blu-ray Disc Rewriter can read DVD-video or BD-MV(BD-ROM) discs, decoding them to display on your pc's monitor requires separate MPEG, H. 264 or VC-1 decoding that is done by separate hardware (either an MPEG, H. 264 or VC-1 decoder card or MPEG, H. 264 or VC-1 decoding done by your video card), or separate software that you install to do MPEG, H. 264 or VC-1 decoding. For further details, refer to the documentation that comes with MPEG, H. 264 or VC-1 software. 3 Software Install the appropriate CD/DVD/BD Recording Authoring Software before using this unit. * Please uninstall any previous CD/DVD/BD burning software you may have loaded on your PC in order to prevent possible compatibility issues. Once you have installed the application software, you may (if you wish) begin to reinstall previous software, taking note for errors. We recommend using the drive with the latest software as some problems encountered when using the drive can be solved by updating the software. Location and Function of Controls Front Panel Rear Panel 12 3 4 12 3 4 5 1. Drive activity indicators The LED used to indicate the operation of Blu-ray Disc Rewriter. 1. Digital Audio Output Connector This connector is not supported. 2. Analog Audio Output Connector This connector is not supported. 3. If more than one jumper is installed, the drive may malfunction or be damaged. Master/Slave setting is determined by jumper installation on the Jumper Connector. The following table shows the possible jumper settings. Name MA (Master) SL (Slave) CS (Cable Select) Function Drive set as Master Drive set as Slave Drive mode set by CSEL on the host IDE interface C S S L M A If you use CSEL setting, the MASTER/SLAVE setting will be made automatically, depending on the hardware configuration. For more details refer to the manual of your computer. PC Connection The Blu-ray Disc Rewriter connects to the motherboard of the host computer using an IDE interface cable. · If an indicator is displayed on the IDE ATA/ATAPI controllers in [Control Panel]-([Performance and Maintenance])-[System]-[Hardware]-[Device Manager], you will need to contact your PC's manufacturer or the motherboard's manufacturer and get the appropriate IDE controller driver. Run Add New Hardware in Control Panel to let PC search again for new device. 8 How to Use the Discs When using any discs, don't attach any stickers or labels to the discs. It could cause read and write errors, but data on the disc may be lost due to damage to the disc itself. The Discs in this unit operate at a very high speed!DO NOT use damaged, cracked or warped discs. The drive's optical unit may be damaged if they break. DO NOT use non-standard discs. NON-standard discs may not play or store data properly. Emergency Eject This drive has a feature that allows the disc to be ejected manually if this becomes necessary such as failure of the drive or a power outage. [. . . ] The BD-R DL, BD-RE DL disc is not supported. *3 DVD-RAM: Writing to 12x disc is not supported. *4 CD-RW: Writing to Ultra speed/Ultra speed plus disc is not supported. *5 There might be some cases when this drive can not satisfy the best performance depending on the conditions of the disc, the drive, and the recording format. [. . . ]