User manual LG 500G-K-

[. . . ] - When the stereo profile is connected, the LCD will display " - When the handsfree profile is connected, the LCD will display " ". ". Power off - Press and hold the PWR/END key for 5 seconds. A shutdown tone will play , the Bluetooth link will be disconnected, and the power will be turned off. - "Power off" is displayed on the screen for 2 seconds - If you want to pair with other devices in the future, the headset must be in Pairing Mode. [. . . ] (Your handset MUST support this feature). - When you end a call, the screen will display "Call Ended" and the call will be terminated. [ Auto Reconnect ] - When the 500G-K- and your handset are separated by a distance of 33 feet(10meters) or more, the headset will display "Disconnected", followed by "Out of Range". When the handset and 500G-K- are brought back within the required distance, the 500G-K- will automatically reconnect with the handset. - It takes 3 hours to fully charge the headset. - "Battery full" is displayed on the screen when charging is complete. Low battery - The battery Icon on the LCD will blink when the battery power is low. - When battery is not charged, the LCD will display "Low Battery" and then turn off. - In this case, the battery needs to be charged. -4- -5- Volume control - Press the VOLUME UP or VOLUME DOWN key to adjust the speaker volume. - There are seven volume levels on the 500G-K-. You will see the number of bars on the LCD changing as you press one of volume keys. Transferring a call - To transfer a call to the Handset from the headset, press the PLAY/PAUSE button. - To transfer a call back to the 500G-K-, press the PLAY/PAUSE button. - The 500G-K- will display "Audio Transfer". Call waiting - There are two types of volume levels. - Pressing any key will turn on the LCD again. Talking Idle Idle Press the PWR/END button for 2 seconds Briefly press the PWR/END button Press the Play/Pause button Press the Play/Pause button Press the Play/Pause button Press the Play/Pause button -8- -9- Summary of LCD indication functions Function Music Play (while paused) Music Stop Music Play Next Song Music Play Previous Song 500G-K- Status Music Pause Music Playing Music Playing Music Playing Action Press the Play/Pause button Press the Play/Pause button for 2 seconds Press the FF button Press the REW button Function 500G-K- Status Operating Power On Power Off Pairing Mode Handsfree Connected Music Connected Incoming Call Outgoing Call Call Connected Last Number Redial Call Cancellation in the Headset Call Cancellation in the Handset Call Rejection Start Voice Command Stop Voice Command Waiting Call Link Lost Transferring a Call Low Battery Warning Music Playing Music Pause Music Stop Music Play Next Song Music Play Previous Song Action LG 500G-K- Power off Pairing Mode Headset Icon Music Icon Caller ID Call Connected Call Connected Redial Call Connected LG 500G-K- LG 500G-K- LG 500G-K- Connecting LG 500G-K- Call Ended Call Ended Call Rejected Voice Command Voice Command Call Swap Disconnected Audio Transfer Low Battery Play/Pause Play/Pause Stop Streaming Streaming Out of Range Call Connected LG 500G-K- LG 500G-K- Streaming Streaming Next Song Previous Song -10- -11- Troubleshooting Function Does not turn on Specification Action When the battery is completely flat When plugging the charger for the first time, "Charging" message will not appear. If "Charging" message appears, this indicates the charger is being charged normally. Determine whether your Handset supports the Headset, Handsfree, A2DP, and AVRCP Bluetooth® Profiles. Charge the battery. ® 500G-K- Status Check whether the 500G-K- battery is fully charged. ITEM Bluetooth Specification Supported Profile Rx. Sensitivity Battery Rated Input Headset Receiver Headset Mic Talk Time Music Play Time Operating Temperature Dimension Description V1. 2 Handsfree / Headset / A2DP/ AVRCP Typ -70dBm 3. 7V, 180mAh, Li-Polymer 4. 8V / 0. 9A 16 / 16 -44dB / Omni directional 9 Hour 6 Hour -10°C 60°C Unable to communicate with the LG Bluetooth® Headset 500G-K- Check whether the Handset supports Headset, Handsfree, A2DP, and AVRCP Bluetooth Profiles. Check whether the battery of the 500G-K- is low. 74(L) X 23(W) X 12(H) Unable to pair the 500G-K- with the Bluetooth® device Check whether the Headset is turned on. Check whether the Headset is in pairing mode. Press the PWR/END button for at least 2 seconds to turn on the Headset. Press the Play/Pause button for 5 seconds to place the Headset in pairing mode. Low sound from the speaker Check the speaker volume lncrease the volume level. -12- -13- Declaration of Conformity FCC NOTICE TO USERS : This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE : To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device. Additional Information 1. [. . . ] This Bluetooth® Headset and the electronic device connected to the Headset operate using radio signals, cellular and landline networks as well as user-programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e. g. Remember, in order to make or receive calls, the Headset and the electronic device connected to the Headset must be switched on and in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. [. . . ]