User manual LG 50PH670S

[. . . ] Model Description Model name 2nd, 3rd Suffix : : 60PH670S-ZA PI Brand name Product name : : LG PH670S Part number (Revision number) : MFL67714604 (1302-REV00) 2. Number of pages N O T E : : : : : : Uncoated, wood-free paper 60 g/㎡ Uncoated, wood-free paper 60 g/㎡ Off set Saddle stitching ENG / ITA 76 : : 1 Color (Black) 1 Color (Black) : 182 mm x 257 mm (B5) “This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc. ) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. [. . . ] Use an extension cable that supports USB 2. 0 if the USB cable or USB memory stick does not fit into your TV’s USB port. *A *B 10 mm 18 mm ASSEMBLING AND PREPARING 15 NOTE yy Antenna Isolator Installation Guide -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. -- Before starting, be sure that the TV antenna is connected. Cable / Antenna Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. €œEquipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” W  hen applying the RF Isolator, a slight loss of signal sensitivity can occur. 16 ASSEMBLING AND PREPARING Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. These devices only work with certain models. MENU P AG-S3** 3D Glasses AN-MR400 Magic Remote AN-VC4** Video call camera AN-WF100 Wi-Fi Dongle AN-TP300 Touch Pen, Cradle With the Touch Pen, you can use the TV as a touch monitor with or without connecting it to your PC. You need to purchase the Touch Pen (including the cradle) together with the dongle. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. Touch Home AN-TD200 Touch Pen Dongle LG Audio Device Compatibility AG-S3** 3D Glasses AN-MR400 Magic Remote AN-VC4** Video call camera AN-WF100 Wi-Fi Dongle AN-TP300 Touch Pen, Cradle AN-TD200 Touch Pen Dongle LG Audio Device PH47**, PH66** • • • • • • • PH67** • • • • • • ASSEMBLING AND PREPARING 17 Parts and buttons ENGLISH Screen Speakers Remote control sensor Power indicator Buttons Button Turns the power on or off. Description Selects the highlighted menu option or confirms an input S H H Accesses the main menus, or saves your input and exits the menus. Changes the input source Adjusts the volume level. 18 ASSEMBLING AND PREPARING Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Yy When transporting a large TV, there should be at least 2 people. [. . . ] MAKING CONNECTIONS B-9 Euro Scart Connection English Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. Yy When watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable. For more information of external device’s connection, refer to the manual provided with each device. [. . . ]