User manual LG 50PM4MA

[. . . ] PLASMA MONITOR MODELS: 42PM4M 50PM4M / 50PM4MA 60PM4M OWNER'S MANUAL Please read this manual carefully before operating your set. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/NO: MFL36274107 (0806-REV05) Printed in Korea Safety Instructions Safety Instructions WARNING Do not place the set in direct sunlight or near heat sources such as electric or gas heaters, a stove and so on. - This may cause a fire. Do not use the set in a damp place such as a bathroom or any place where it is likely to get wet. - This may cause a fire or could give you an electric shock. Bend the antenna cable between the inside and the outside of the building to prevent rain from flowing in. - This may cause water damaged inside the set and could give you an electric shock. Earth wire should be connected. - If the earth wire is not connected, there is possibility of electric shock caused by the leakage current. [. . . ] · The sound Surround MAX, Flat, Music, Movie and Sports are programmed for good sound reproduction at the factory and cannot be changed. R - TruSurround XT is a trademark of SRS Labs, Inc. - TruSurround XT technology is incorporated under license from SRS Labs, Inc. AVL (Auto Volume Leveler) Volume - This feature maintains an equal volume level; even if you change channels. PICTURE0 SOUND G SSM AVL Balance Speaker 0 PICTURE0 SOUND0 TIME0 SPECIAL0 SCREEN0 SSM AVL Balance Speaker G On Off TIME0 SPECIAL0 SCREEN0 0 Menu Prev. Menu Prev. 1. Press the G G D /E button to select the SOUND menu. button and then use button and then use D /E D /E button to select A VL. Press the EXIT button to save the new settings. Owner's Manual 21 Operation Sound Menu Options Balance PICTURE0 SOUND G SSM AVL Balance Speaker 0 PICTURE0 SOUND0 TIME0 SPECIAL0 SCREEN0 SSM AVL Balance Speaker G 0G L R TIME0 SPECIAL0 SCREEN0 Menu Prev. Menu Prev. 1. Press the MENU button and then use D 2. Press the G G /E button to select the SOUND menu. button and then use button and then use D /E F /G button to select Balance. button to make appropriate adjustments. 4. Press the EXIT button to save the new settings. Speaker PICTURE0 SOUND G SSM AVL Balance Speaker 0 PICTURE0 SOUND0 TIME0 SPECIAL0 SCREEN0 SSM AVL Balance Speaker 0 G TIME0 SPECIAL0 SCREEN0 On Off Menu Prev. Menu Prev. 1. Press the G G D /E button to select the SOUND menu. button and then use button and then use D /E D /E button to select Speaker. Press the EXIT button to save the new settings. 22 Plasma Monitor Operation T imer Menu Options Clock Setup - If current time setting is wrong, correct the clock setting. PICTURE0 SOUND0 TIME G ENGLISH Clock Off time On time Auto sleep PICTURE0 SOUND0 TIME0 SPECIAL0 SCREEN0 Clock Off time On time Auto sleep G -- : -- SPECIAL0 SCREEN0 Menu Prev. Menu Prev. 1. Press the G G G D /E button to select the TIME menu. button and then use button and then use button and then use D /E D /E D /E button to select Clock. Press the EXIT button to save the new settings. On/Off Time Setup (Except 50PM4MA-WA) On/Off - Timer function operates only if current time has already been set. - Off-Time function overrides On-Time function if they are set to the same time. The Set must be in standby mode for the On Time to work. - If you do not press any button within 2 hours after the monitor turns on with the On Time function, the monitor will automatically revert to standby mode. PICTURE0 SOUND0 TIME G Clock Off time On time Auto sleep PICTURE0 SOUND0 TIME0 SPECIAL0 SCREEN0 Clock Off time On time Auto sleep G On Off SPECIAL0 SCREEN0 -Volume : -30 Menu Prev. Menu Prev. 1. Press the G D /E button to select the TIME menu. button and then use D /E button to select Off time or On time. 3. Press the G button and then use D / E button to select On. · To cancel On/Off time function, select Off. Press the G G button and then use button and then use D /E D /E button to set the hour. button to set the minutes. G For only On time function; Press the button and then use D /E button to set volume level. 6. Press the EXIT button to save the new settings. Owner's Manual 23 Operation T imer Menu Options On/Off Time Setup (only 50PM4MA-WA) On/Off - Timer function operates only if current time has already been set. - Off-Time function overrides On-Time function if they are set to the same time. The Set must be in standby mode for the On Time to work. [. . . ] Colour Temperature (Command2:u) G To adjust colour temperature. You can also adjust ACC in the Picture menu. G To adjust Key code for IR remote control. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code : Refer to See page 39. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: Cool 2: Warm 3: User Acknowledgement [c][ ][Set ID][ ][OK][Data][x] Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0: Normal 1: Cool 2: Warm 3: User 20. Tile Mode(Command : d d) G Change a Tile Mode. 16. [. . . ]