User manual LG 50PM680S

[. . . ] Stock (Paper) 2 y Cover : Coated paper , S/W 150 g/m 2 y Inside : Uncoated paper , 60 g/m 4. ) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. [. . . ] Y New features may be added to this TV in the future. Y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. Y The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. Open the package and make sure all the accessories are included. You can use the TV network functions only when the network connection is made. Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. Y Do not use any unapproved items to ensure the safety and product life span. Y Any damage or injuries caused by using unapproved items are not covered by the warranty. Y Some models have a thin film attached on to the screen and this must not be removed. 21) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Y The items supplied with your product may vary depending on the model. Y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Place the ferrite core close to the TV and a wall plug. - If there are six ferrite cores, follow as shown in Figure 1, 2 and 3. - If there are seven ferrite cores, follow as shown in Figure 1, 2, 3 and 4. Y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. use an extension cable that supports USB 2. 0 if the USB cable or USB memory stick does not fit into your TV's USB port. [. . . ] To display images by using progressive scan, make sure to use the euro scart cable. Y When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART cable. (Only 3D models) y If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed. For more information of external device's connection, refer to the manual provided with each device. [. . . ]