User manual LG 55LA6408

[. . . ] Please read this manual carefully before operating your set and retain it for future reference. νικά Slovenščina LANGUAGE B-1 MAKING CONNECTIONS B-1 B-3 B-4 B-6 B-7 B-9 B-11 B-12 B-14 B-14 B-17 B-19 B-21 B-24 Antenna connection Satellite dish connection HDMI connection - ARC (Audio Return Channel) DVI to HDMI connection Component connection Composite connection MHL connection Audio connection - Digital optical audio connection USB connection CI module connection Headphone connection Euro Scart connection B-33 SPECIFICATIONS COMMON SETTING UP THE TV A-3 Setting up the TV Image shown may differ from your TV. Attaching the stand LA62**, LA64**, LA66**, LN57**-ZE/ZK 1 4 EA M4 x 14 3 (Only LA62**, LN57**-ZE/ZK) Stand Body Front Stand Base M4 x 14 4 EA 2 (Only LA62**, LN57**-ZE/ZK) (Only LA64**, LA66**) (Only LA64**, LA66**) M4 x 14 4 EA A-4 SETTING UP THE TV LA69**, LA74** 3 1 Stand Base M4 x 20 4EA 2 SETTING UP THE TV A-5 LN57**-ZA 1 Stand Body 3EA P5 x 25 CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Yy Make sure that the screws are inserted correctly and fastened securely. [. . . ] 18 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. --  eave a 10 cm (minimum) space from the L wall for proper ventilation. Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. (Only 32/39/42/47/50/60LN57**-ZA) ENGLISH ENG 10 cm 10 cm m 10 c 10 cm 10 cm 2 Connect the power cord to a wall outlet. (Only 32/39/42/47/50LN57**-ZE/ZK, 32/39/42/47/50LA62**, 32/42/47/50LA64**, 32/42/47/50LA66**) CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. σ Using the Kensington security system (This feature is not available for all models. Yy The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. Connect the Kensington security system cable between the TV and a table. 2 EA , P4 x 8 (Only 47/50LN57**-ZE/ZK , 47/50LA62** , 47/50L A64** , 47/50LA66**) 2 EA , M4 x 8 (Only 32/39/42LN57**-ZE/ZK , 32/39/42LA62** , 32/42LA64** , 32/42LA66**) ASSEMBLING AND PREPARING 19 NOTE (Only 32/39/42/47/50LN57**-ZE/ZK , 32/39/42/47/50LA62** , 32/42/47/50LA64** , 32/42/47/50LA66**) How to fix the TV to a table 1. Connect the Desk-mount Cables to the Stand Base using the Bracket Screws. Fix the Desk-mount Cables to a table using the Desk-mount Screws. Once the TV is fixed, move the table close to the wall. Adjusting the angle of the TV to suit view (This feature is not available for all models. ) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. (Only LA62**, LA64**, LA66**) ENGLISH ENG 15 15 WARNING yy To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 42/47LA69**, 42/47LA74**) 10 10 Swivel 8 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 55LA69**, 55/60LA74**) 8 8 20 ASSEMBLING AND PREPARING CAUTION yy When adjusting the angle adof the product, watch out for your fingers. »» Personal injury may occur if hands or fingers are pinched. [. . . ] (Depending on model) Optical Digital Audio Out is not available yy when connecting a headphone. HINWEIS English Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. Yy When watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable. [. . . ]