User manual LG 55LB582V

[. . . ] The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. [. . . ] yy When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall. Caution >> 55LB582V-NB. ADEULLK_ENG. indd 12 2014-02-07 9:55:37 Connecting 13 Connecting the subwoofer Attaching the subwoofer to the unit To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals(red tube) marked + (plus). Connecting to your TV Using an OPTICAL cable 1. Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable. 2 Connecting Optical cable 2. Set the INPUT source to OPTICAL. Press OPTICAL on the remote control or F on the unit until the function is selected. You can enjoy the TV audio through the speakers of this unit. yy After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device connected by an optical cable. yy If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal. yy Depending on the connected device, this function may not operate. yy In Bluetooth mode, this unit may be turned on by AUTO POWER setting depending on the connected Bluetooth device and then LG TV function is selected. To use this function again, you should reconnect the TV and the unit. Using Bluetooth technology About Bluetooth Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA etc. Note , , 3 Operating Bluetooth Profiles In order to use Bluetooth® wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profile. A2DP (Advanced Audio Distribution Profile) 55LB582V-NB. ADEULLK_ENG. indd 17 2014-02-07 9:55:38 18 Operating Listening to music stored on the Bluetooth devices Pairing your unit and Bluetooth device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select the Bluetooth function by using h on the remote control or F on the unit until the function is selected. 2. Operate the Bluetooth device and perform the pairing operation. [. . . ] Operate the remote control within about 7 m (23 ft). The remote control does not work properly. yy There is an obstacle in the path of the remote control and the unit. yy The batteries in the remote control is exhausted. [. . . ]