User manual LG 55LB630V

[. . . ] This is an official DivX Certified® device that plays DivX video. Visit www. divx. com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. [. . . ] If MPEG is not supported, another audio type is set in that order. See p. 77 (Audio Language Selection) ENGLISH ENG HE-AAC, Dolby Digital+, Dolby Digital, MPEG 74 CUSTOMIZING SETTINGS Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Press Q. MENU and press the Navigation to access the Audio or Audio Language and press OK. 2 Press the Navigation button to scroll to the sound output and press OK. Broadcast Mono Stereo Dual On Screen Display MONO STEREO DUAL I , DUAL II , DUAL I + II y Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarityof sound is improved. y Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II. DUAL I DUAL I I DUAL I+I I Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker. ENGLISH ENG Nicam Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. 1 When NICAM mono is received, you can select NICAM MONO or FM MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM MONO. FM MONO. 3 When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or Speaker Sound Output Selection In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers. It is available to use this function in Lock System "On" This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult's TV programmes, according to the ratings limit set. Enter a password to watch a blocked programme. It is available to use this function in Lock System "On" Locks or unlocks the buttons on the TV. Description Block Programme Parental Guidance (In Digital Mode only) Input Block Key Lock CUSTOMIZING SETTINGS 77 OPTION settings 1 Press Home to access the main menus. y Image shown may differ from your TV. OPTION Move : UK : Normal :1 OK Language(Language) Country Disability Assistance ISM Method Factory Reset Set ID Mode Setting : Home Use 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available general settings are described in the following. Setting Language Selects a language for the display or audio. Option Menu Language Audio Language Select your desired language. [. . . ] Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler X. net license Copyright (c) 1995-2001 International Business Machines Corporation and others All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen- OPEN SOURCE LICENSE 137 tation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation. [. . . ]