User manual LG 580.51450100

[. . . ] 2 Make sure that the unit is correctly ventilated at all times; do NOT place clothing or other materials over it. 3 NEVER spill liquids of any kind into the unit. Should this happen, unplug the unit and contact your installation specialist. 4 Do NOT insert anything between the air outlet blades, as it may damage the inner fan and you may get hurt. [. . . ] You can select the Off timer when the air conditioner operates in the Cool or Dry mode. Control Panel 1 Check that the air conditioner has been switched on; if necessary, press the (On/Off) button. Power 2 2 Set the operating time by pressing the Timer button on the unit one or more times until the desired time is displayed. The operating time can be set between 1 and 24 hours. Result: Each time you press the Timer button: - The time is adjusted b y 1 hour and displayed on the control panel - The unit beeps The operating time is displayed and decreases automatically to indicate the remaining time. The air conditioner switches off automatically when the operating time reaches zero. You can select the fan speed, temperature and Energy saving mode after setting the On timer and Off timer mode. However, when you change the mode, the On timer and Off timer mode is cancelled. To Cancel the Off Timer 1 To cancel the timer, press the times until "--" is displayed. Timer button on the unit one or more 2 Press the (On/Off) button on the unit. E-13 3 Setting the Sleep Timer The Sleep Timer can be used when your are cooling your room to switch the air conditioner off automatically after 8 hours. Control Panel If you wish to switch the unit off at a specific time, refer to page 13. Power 1 Make sure that you have selected the Cool mode. 2 Press the Result: button on the unit. Each time you press a button, the unit beeps. The remaining time is displayed and decreased by 1 hour automatically to indicate the remaining time. The air conditioner will be controlled as illustration below . Cooling When the temperature has been increased by 2 F (after 1 hour), it is maintained for 7 hours. To Cancel the Sleep Timer To cancel the timer, press: The Result: button on the unit. The SLEEP indicator is no longer displayed. The air conditioner operates in the mode selected last. If you select the Energy Saving mode in the Sleep Timer mode, the Sleep Timer will be cancelled and the air conditioner will start up in the Energy Saving mode. E-14 Selecting Energy Saving Mode If the wish to save energy when using your air conditioner, select the energy saving mode. 1 To select the energy saving mode, press the Result: button on the unit one or more times until the Energy Saver indicator lights up. You can select the fan speed, temperature and Energy saving mode after setting the On timer and Off timer mode. However, when you change the mode, the On timer and Off timer mode is cancelled. To Cancel the Off Timer 1 To cancel the Off Timer, press the Timer button one or more times until the timer setting disappears. 2 Press the (Set/Cancel) button. If you want to turn off the air conditioner before the timer reaches the setting time, press the (On/Off) button. E-21 Setting the Sleep Timer The Sleep Timer can be used when you are cooling to switch the air conditioner off automatically after a period of 8 hours. If you wish to switch the unit off at a specific time, refer to page 21. 1 2 Make sure that you have selected the Cool mode. Press the Result: button on the remote control. Each time you press a button, the unit beeps. The remaining time is displayed and decreased by 1 hour automatically to indicate the remaining time. The air conditioner will be controlled as illustrations below. Cooling When the temperature has been increased by 2 F (after 1 hour), it is maintained for 7 hours. To Cancel the Sleep Timer To cancel the timer press: The Result: button on the remote control. The air conditioner operates in the mode selected last. If you select the Energy Saving mode in the Sleep Timer mode, the Sleep Timer will be cancelled and the air conditioner will start up in the Energy Saving mode. E-22 Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the energy saving mode. 1 To select the energy saving mode, press the button on the remote control one or more times until the Energy Saving indicator lights up. Result: The fan and compressor cycle on and off together. [. . . ] Dust may be blocking the air filter; refer to page 26 for cleaning instructions. Check that there is no obstacle blocking the air flow into or out of the unit. Check that the timer has been programmed correctly; refer to page 12~14, 20~22. Ventilate the room. The air conditioner does not operate with the remote control No beep is heard when you press the (On/Off) button on the remote control The air conditioner does not cool The timer is not correctly triggered Odors are permeating the room during air conditioning Technical Specifications Design and specifications are subject to change without notice. [. . . ]