User manual LG 60PH670S

[. . . ] (1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. A-2 … A-4 Front (Eng) 2 … … … … 25 Blank Front (ger) 2 … … … … 25 Blank Front (fre) 2 … … … … 25 Blank Front (ita) 2 … … … … 25 Blank Front (spa) 2 … … … … 25 Blank Front (por) 2 … … … … 25 Blank Front (dut) 2 … … … … 25 Blank Front (gre) 2 … … … … 25 Blank Front (slv) 2 … … … … 25 Blank Part number (Revision number) Total pages : MFL67714606 (1302-REV00) : 272 pages Back Cover B-1 … … … B-33 (eng) OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. νικα Slovenščina Stan LANGUAGE B-1 MAKING CONNECTIONS B-1 Antenna Connection B-3 Satellite dish Connection B-4 HDMI Connection B-8 DVI to HDMI Connection B-10 Component Connection B-11 Composite Connection B-12 MHL Connection B-15 Audio Connection - Digital optical audio connection B-17 USB Connection B-19 CI module Connection B-21 Euro Scart Connection B-29 SPECIFICATIONS COMMON SETTING UP THE TV A-3 SETTING UP THE TV Image shown may differ from your TV. 3 Attaching the stand 1 Only 50PH47**, 50/60PH67**, 50/60PH66** 3 EA M5 x 16 Only 42PH47** Only 50PH47**, 50/60PH67**, 50/60PH66** 3 EA M4 x 14 Stand Body Front 4 EA M5 x 16 Only 42PH47** 4 EA M4 x 14 Stand Base To detach the stand (Only 50PH47**, 50PH67**, 50PH66**) 1 2 4 EA M5 x 16 A-4 SETTING UP THE TV 2 Tidying cables 1 Install the Power Cord Holder and Power Cord. [. . . ] Product specifications or contents of this manual may be changed without prior notice due to upgrade yy of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug. [to a wall plug] [Figure 1] 2 Use the ferrite core to reduce the electromagnetic interference in the cable. Wind the component Y, Pb, Pr, L, R cable on the ferrite core once. [to an External device] [to the TV] 10 mm(+ / - 5 mm) ENGLISH [to the TV] (Black) [Cross Section of Ferrite Core] [Figure 2-1] Gather and bind the component Y, Pb, Pr, L, R and scart cable with the ferrite core. [to an External device] [to the TV] (Black) [Cross Section of Ferrite Core] [Figure 2-2] Wind the PC audio cable on the ferrite core once. [to an External device] 10 mm(+ / - 5 mm) [to the TV] [Figure 2-3] 10 mm(+ / - 5 mm) 3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core B and thrice on the ferrite core A. Place the ferrite core close to the TV and an External device. Make sure not to hold the transparent part, speaker, or speaker grill area. 18 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. --  eave a 10 cm (minimum) space from the L wall for proper ventilation. Adjusting the angle of the TV to suit view (This feature is not available for all models. ) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. ENGLISH 20˚ 20˚ 10 cm 10 cm m 10 c 10 cm CAUTION yy When adjusting the angle of the product, watch out for your fingers. -- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. 20 20 2 Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. Securing the TV to a wall (This feature is not available for all models. [. . . ] This feature is not available in all countries. NOTE yy Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. Yy If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. [. . . ]