User manual LG 60PM6700

[. . . ] Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. (2) Especially, Don't use or contain lead(Pb) and cadmium(Cd) in ink. 3. Special Instructions (1) Origin Notification * LGEIN : Printed in Indonesia * LGESP : Printed in Brazil * LGEND : Printed in China * LGEMA : Printed in Poland * LGEWA : Printed in U. K. [. . . ] y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. y The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION y Do not use any unapproved items to ensure the safety and product life span. y Any damage or injuries caused by using unapproved items are not covered by the warranty. y Some models have a thin film attached on to the screen and this must not be removed. ASSEMBLING AND PREPARING 13 ENERGY AV MODE INPUT TV SAVING ENERGY AV MODE INPUT ENGLISH ENG 1 TV 2 5 8 0 MARK 3 6 9 FLASHBK SAVING 1 4 7 LIST 2 5 8 0 MARK 3 6 9 FLASHBK 4 7 LIST FAV 3D FAV 3D VOL CH P A G E CH P P A G E VOL MUTE MENU INFO Q. MENU MUTE MENU INFO Q. MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote Control, Batteries (AAA) (See p. 29) ENTER BACK EXIT L/R SELECT FREEZE RATIO Magic Remote Control, Batteries (AA) (Only 50/60PM97**) (See p. y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2. 0 if the USB cable or USB memory stick does not fit into your TV's USB port. *A *B 10 mm 18 mm ASSEMBLING AND PREPARING 15 Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. These devices only work with certain models. ENGLISH ENG P AG-S3** 3D Glasses AN-WF100 Wireless LAN AN-MR300 Magic Remote Control Compatibility AG-S3** 3D Glasses AN-WF100 Wireless LAN AN-MR300 Magic Remote Control PM47** · · · PM67** · · · PM68** · PM97** · · · The model name or design may be changed depending on the upgrade of product functions, manufacturer's circumstances or policies. 16 ASSEMBLING AND PREPARING Parts and buttons USB IN 2 HDD IN / DVI IN 2 USB IN 1/ USBApps USB Hub IN 1(ARC) IN AV IN 1 ENGLISH ENG H H Screen Remote control and intelligent sensors1 Power indicator Speakers INPUT SETTINGS OK Buttons LAN RGB IN (PC) AUDIO IN (RGB/DVI) (CONTROL & SERVICE) RS-232C IN HDMI IN 3 4 Except for PM47** AV IN 2 L/MONO ANTENNA/ CABLE IN LNB IN Satellite 13 / 18V 700mA Max Antenna cable socket 2 Connection panel Button /I INPUT SETTINGS OK Turns the power on or off. Changes the input source. Description Accesses the main menus, or saves your input and exits the menus. Selects the highlighted menu option or confirms an input. Scrolls through the saved programmes. 1 2 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. Antenna cable socket - The Antenna cable socket may differ from the model. ASSEMBLING AND PREPARING 17 Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLISH ENG CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen. y It is recommended to move the TV in the box or packing material that the TV originally came in. y Before moving or lifting the TV, disconnect the power cord and all cables. y When holding the TV, the screen should face away from you to avoid damage. y When transporting the TV, do not expose the TV to jolts or excessive vibration. [. . . ] Allows to browse the description of the function you want from the index. MAINTENANCE / TROUBLESHOOTING 33 MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. ENGLISH ENG CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand y To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. y To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen. [. . . ]