User manual LG 62DC1D

[. . . ] If an accessory is missing, please contact the dealer where you purchased the TV. I Here shown may be somewhat different from your TV. This item is not included for all models. ACCESSORIES RATIO RATIO Batteries Owner's Manual RATIO RATIO AV MODE V ENERGY SAVING SLEEP POWER ON/OFF POWER TV AV MODE V AV MODE V TV POWER ENERGY SAVING SAVING AV MODE ENERGY SAVING Polishing Cloth Polishing cloth for use on the screen. MARK MARK FAV LIST Q. VIEW FAV MUTE or LIST Q. VIEW MUTE or or * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. This may cause scratching or discolouration. MENU RETURN MARK FAV Q. MENU Power Cord Only 32/37/42/47LH7*** Remote Control (Only 37/42/47LH7***) Cable management clip (Refer to p. 23) (32LH7*** only) Protection cover (Refer to p. 20) Stand rear cover (Refer to p. 21) (47LH7*** only) Protective Bracket and Bolt for Power Cord (Refer to P. 25) (37LH7*** only) (42LH7*** only) x7 M4x20 M4x20 x8 M4x20 x3 M4x16 x4 M4x16 x8 USB extension cable Make sure to use the provided USB extension cable, Which is specially designed for a slim fit. bolts for stand assembly (Refer to p. 18) O n l y 1 9 / 2 2 / 2 6 L U 5* * * Only 19/22LH2*** x2 (Only 19/22LU5***) x3 (Only 26LU5***, ) Cable Holder (Refer to p. 22) Bolts for stand assembly (Refer to p. 17) Cable management clip (Refer to p. 22) Only 32/42LF2*** Protection cover (Refer to p. 20) Only 26/32/37/42LH2***, 32/37/42/47LH3***, 37/42/47/55LH5***, 32/42LH6***, 42/47LH9*** (Except 55LH5***) or x4 x4 x4 or Bolts for stand assembly (Refer to p. 18) Protection cover (Refer to p. 20) Bolts for stand assembly (Refer to p. 17) Protection Cover (Refer to p. 20) 1 CONTENTS ACCESSORIES PREPARATION CONTENTS Front Panel Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] -If the headset is turned off, not in place or has an error. -Because products such as microwave oven, wireless LAN, plasma light, gas range etc. , use the same frequency range, it can cause communication error. G Only one Bluetooth headset can be connected at once. G Connection that is lost due to the TV being turned off etc. Try connecting the applicable device again. G Some operations can be slower while operating the headset. G Even if you choose simplink Home Theater after using the headset during Simplink operation, the unit will not automatically switch to Home Theater speakers. G When the headset connection continuously fails, pair the device one more time. G The audio quality of mono headsets will not be as good as that for stereo headsets. G Mono headsets may suffer from noise as the distance from the TV increases, because they use a different transmission method compared with stereo headsets. G When a Bluetooth headset is in use, the Volume +/- and Mute keys do not work, and the Audio menu returns to the default value and is disabled. G MANAGING REGISTERED BLUETOOTH DEVICE If there are no devices registered, Registered Bluetooth Device menu will be deactivated and cannot be used. You cannot listen to music while receiving image(s). If you use Bluetooth to listen to music, the Variable/Monitor out(the TV Audio out) does not work. 77 TO USE A USB DEVICE (Except 19/22/26/32/37/42LH20**, 32/42LF2***, 19/22/26LU5***) When connecting the USB device When you connect a USB device, this pop up menu is displayed, automatically. "POP UP MENU" will not be displayed while the OSD including Menu is activated or while the Bluetooth Headset is connected. In USB device, you can not add a new folder or delete the existing folder. I Here shown may be somewhat different from your TV. 1 Connect the USB device to the U S B on the TV. I N jack · This TV Supports on JPEG, MP3 and SD Divx. When removing the USB device USB memory stick Select the USB device menu before removing the USB device. 2 Select P H O T O L I S T, M U S I C L I S T or M O V I E L I S T. 1Q. MENU 2 OK Select Eject. 3 OK PHOTO LIST MUSIC LIST MOVIE LIST 78 TO USE A USB DEVICE Precautions when using the USB device Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition programme may not be recognized. G A USB storage device which uses its own driver may not be recognized. G The recognition speed of a USB storage device may depend on each device. G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. [. . . ] OSD Select (Command: k l) To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK][Data][x] 15. Abnormal State (Command: k z) To recognize an abnormal state. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF: Read Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Data 00: Normal (Power on and signal exist) Data 01: No signal (Power on) Data 02: Turn the TV off by remote control Data 03: Turn the TV off by sleep time function Data 04: Turn the TV off by RS-232C function Data 05: 5V down Data 06: AC down Data 07: Turn the TV off by Fan Alarm function (option) Data 08: Turn the TV off by Off time function Data 09: Turn the TV off by Auto off function Data a: Turn the TV off by AV board detection. [. . . ]