User manual LG 65092

[. . . ] Enjoy what your air conditioner offers both functionally and esthetically. · function function allows you to set a comfortable sleep temperature while saving energy and having sound sleep. For easy future reference write the model and serial number down. You can find your model number on the bottom side of the air conditioner. Model # Serial # 02_ features MID_AS09U series_IB_30920A_E_9. 09. 09. indd 2 2009-9-23 9:52:58 safety information SAFETY INFORMATION To prevent electric shock, disconnect the power before servicing, cleaning, and installing the air conditioner. Before using your new air conditioner, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance. Because the following operating instructions cover various models, the characteristics of your air conditioner may differ slightly from those described in this manual. If you have any questions, call your nearest contact center or find help and information online at www. samsung. com. [. . . ] Press the Power button on the remote control. 2. ENGLISH Press the Mode button on the remote control until Fan mode indicator appears on the remote control display. The air conditioner operates in Fan mode and circulate the indoor air. Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry and Fan. Press the Fan or button on the remote control to set the desired fan speed. Each time you press the Fan or button, fan speed will change in order of Low, Medium and High. · While you are using the remote control, make sure correct indicator which matches your selection appears on the remote control display. · Air flow can be adjusted manually (see page 18 for instructions). operating _17 MID_AS09U series_IB_30920A_E_9. 09. 09. indd 17 2009-9-23 9:53:53 operating basic function ADJUSTING THE AIR FLOW DIRECTION Air flow can be directed to your desired position. Vertical air flow Air flow blades move up and down. Press the Air swing button on the remote control. Air swing indicator will be on and air flow blades move up and down continuously to circulate the air. button on the remote control again, to keep the air flow direction in a Horizontal air flow Make sure one of the blade pin lever that stick out of the air flow blades are not broken. Move the blade pin lever left or right to keep the air flow direction in a constant position you prefer. Blade pin lever Be extremely careful with your fingers while adjusting the Horizontal air flow direction. There is a potential risk of personal injury when the unit is mishandled. CAUTION 18_ operating MID_AS09U series_IB_30920A_E_9. 09. 09. indd 18 2009-9-23 9:53:57 using advanced functions USING THE TURBO FUNCTION Turbo function will be helpful to cool your room quickly and effectively by operating at the maximum fan speed for 30 minutes. If On timer is not set within 10 seconds, the air conditioner will end setting. Press the Mode button on the remote control until the desired mode appears on the remote control display. The air conditioner will operate in the mode you set. On timer function is available in Auto/Cool/Dry/Fan mode. · Temperature can also be adjusted (see step 3 on page 14 for instructions). · All the indicators other than On Timer indicator will disappear approximately after 10 seconds after the setup. · When the On Timer setting is done, you can press the On Timer button again to change the preset time. Press the On Timer button to change time setting and then press the Set/Cancel button to active it on. 20_using advanced functions MID_AS09U series_IB_30920A_E_9. 09. 09. indd 20 2009-9-23 9:54:05 To deactivate the On Timer 1. Press the Set/Cancel button on the remote control while On Timer is on. On timer you set will be canceled and On timer indicator will disappear. Off Timer This function allows you to turn off the air conditioner automatically within the time range of 24 hours. Off timer is available while your air conditioner is on. Press the Off Timer button on the remote control. [. . . ] · Check if there is a power failure. · Check if you selected Fan mode. Press the Mode button on the remote control to select another mode. · Check if the set temperature is higher than the current temperature. [. . . ]