User manual LG 65LA970W

[. . . ] Drawn Checked Kim S. I Apr/12/2013 Approved JongOk. Kim Apr/12/2013 Printing Specification Signature MMM/DD/YYYY Kim K. S Apr/12/2013 1. Model Description Model name 2nd, 3rd Suffix : : 47LA860V-ZA EK Brand name Product name : : LG 47LA860V-ZA Part number (Revision number) : MFL67728107 (1309-REV02) 2. Printing colors • Cover • Inside 3. Stock (Paper) • Cover • Inside 4. [. . . ] yy When holding the TV, the screen should face away from you to avoid damage. yy When transporting the TV, do not expose the TV to jolts or excessive vibration. yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen. yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. ASSEMBLING AND PREPARING 19 Setting up the TV Image shown may differ from your TV. LA860*, LA960* ENGLISH ENG Attaching the stand LA79** 1 M4 x 14 4EA 1 Stand Body Stand Base Front Stand Base 2 2 3 3 M4 x 14 4EA M4 x 16 4EA (LA860*) M4 x 20 4EA (LA960*) 20 ASSEMBLING AND PREPARING LA868* LA965* ENGLISH ENG 1 1 Stand Base Stand Base 2 Stand Base 2 ① ② ① Attach the stand to the TV using the upper ② Attach the stand to the TV using the lower connection on the back of the TV. mounting hole on the back of the TV. 3 yy Be sure to attach the upper mounting hole first, and then attach the lower connection second. NOTE 3 M4 x 16 4 EA M4 x 14 4 EA ASSEMBLING AND PREPARING 21 LA97** LA98**, LM96** ENGLISH ENG 1 Front 1 Stand body Front Stand Base 2 Stand base 2 3 6 EA M5 x 16 Front 3 M4 x 14 4 EA NOTE yy The stand screws are already attached at the back of the TV. Please use these attached screw to assemble the TV and stand. (Only 65LA97**) 22 ASSEMBLING AND PREPARING 4 ENGLISH ENG CAUTION 4 EA M4 x 20 yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed. ) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. NOTE yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. ASSEMBLING AND PREPARING 23 Mounting on a table 1 Lift and tilt the TV into its upright position on a table. --  eave a 10 cm (minimum) space from the L wall for proper ventilation. Adjusting the angle of the TV to suit view (This feature is not available for all models. ) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. (Only LA79**) ENGLISH ENG 15 10 cm 15 10 cm m 10 c 10 cm 10 cm Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 42/47LA860*) 2 Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. Using the Kensington security system (This feature is not available for all models. ) Image shown may differ from your TV. yy The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington. com. Connect the Kensington security system cable between the TV and a table. 10 10 Swivel 8 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 55/60LA860*) 8 8 Swivel 7 degrees to the left or right and adjust the angle of the TV to suit your view. (Only LA98**, LM96**) 7 7 24 ASSEMBLING AND PREPARING CAUTION yy When adjusting the angle adof the product, watch out for your fingers. »» Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. ENGLISH ENG CAUTION yy Make sure that children do not climb on or hang on the TV. NOTE yy Use a platform or cabinet that is strong and large enough to support the TV securely. yy Brackets, bolts and ropes are not provided. [. . . ] yy Check if the batteries are still working and properly installed ( yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet. yy Check if there is a problem in the wall outlet by connecting other products. yy Check if the Auto sleep feature is activated in the Time settings. [. . . ]