User manual LG 721.21295000

[. . . ] Do not allow the vacuum cleaner to run unattended at any time. Use the vacuum cleaner only for its intended use as described in these instructions. · Do not use the vacuum cleaner without a dust bag. Change the dust bag before it is full in order to maintain the best efficiency. [. . . ] Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit. · Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Do not block the suction or the exhaust port. · Switch the vacuum cleaner off on the body of the machine before unplugging from the electrical outlet. Disconnect the plug from the electrical outlet before changing the dust bag or dust container. To avoid damage, please remove the plug by grasping the plug itself, not by pulling on the cord. · This appliance is not intended for use by young children or infirm persons without supervision unless they are adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance. · The plug must be removed from the socket outlet before cleaning or maintaining the appliance. · The use of an extension cord is not recommended. Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. Push the Open button on the transparent screen cover to separate the cover. . Remove the brushbar from the transparent screen. . Remove waste matter such as dust and hair tangled around the brushbar using scissors. maintain tools and filter _ maintain tools and filter . Remove dust inside the brush housing using a dry duster or crevice tool. . Insert brushbar into rotating belt and assemble. . Click the transparent screen cover back into place to reassemble. Parquet brush (Option) Vacuum dust in wide area at once · Remove waste matter completely if the inlet is blocked. 10_ maintain tools and filter Brush for blanket (Option) For picking up pet hair and fibre on upholstery and bed linen. Clogs on turbine keeps brush from turning, and in this case, take care of it. Remove waste matter completely when inlet is blocked. . Turn the lock button to `UNLOCK', and remove waste matter. To reassemble, align the cover to the front of the main body and close. [. . . ] To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the `LOCK' position. DUST FUll INDIcATOR Remote-Control Type When the "DUST FULL LAMP" light comes on, please change the DUST BAG as shown in the following illustrations. DUST FUll lAMP maintain tools and filter _11 maintain tools and filter chANGING ThE DUST bAG 1 A used dust bag can be sealed by removing the paper from the adhesive strip and sealing the strip over the hole. OpTIONAl · For Cloth Bag After using, if the cloth bag is full of dust, clean the cloth bag and use it again. You can purchase dust bags in the shops where you bought this vacuum cleaner. Micro bag or paper bag both can be used as you prefer(Micro-bag:VP-78M, Paper-bag:VP-90) clEANING INlET FIlTER 1 Don't throw away the filter. 1_ maintain tools and filter clEANING OUTlET FIlTER SILVER NANO HEPA H13 (Option) 03 MAINTAIN TOOlS AND FIlTER 1 CAUTION · When the Assy Panel Control is pulled up very strongly, it is possible the Assy Panel Control is separated for the safety of the product. In this case, just reassemble the Assy Panel Control. [. . . ]