User manual LG 76282

[. . . ] Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. x Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center. x Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. [. . . ] Result: x The remaining time is displayed. x Blinking of the timer indicator stops. x The selected mode and the temperature disappear on the display after 5 seconds. x The air conditioner will switch off automatically when the counter displayed on the remote controller reaches the setting time as disappearing the Off timer setting. Example If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the On Timer button until `2. 0 Hr' is displayed. Press the Off Timer button until `4. 0 Hr' is displayed. Note You can see or change the setting mode and/or the temperature by pressing the Mode button or the Temperature buttons after setting the Off timer. To Cancel the Off Timer 1 To cancel the Off Timer, press the Off Timer button one or more times until the timer setting disappears. 2 Press the (Set/Cancel) button. Note If you want to turn off the air conditioner before the timer reaches the setting time, press the (ON/OFF) button. E-19 Using W i re l e s s Remote C o n t ro l l e r This chapter indicates how to operate and program your air conditioner with the wireless remote controller. The wireless remote controller is an optional accessory. E-20 Selecting the Automatic Operation Mode ENGLISH In the Automatic mode, the room temperature and the fan speed are controlled automatically. 1 If necessary, press Result: (ON/OFF) button. x The On/Off indicator on the unit comes on. x The air conditioner runs in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. IMPORTANT 2 To select the AUTO mode, press the Mode button until at the top of the wireless remote controller. Result: x Each time you press Temperature buttons: - The temperature is adjusted by 1OC. x The air conditioner starts heating, provided that the room x temperature is lower than the selected temperature ; the fan x will, however, operate. 4 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed : Automatic(rotated : Low Medium High ) 5 To control the direction of the air flow, refer to page 25. E-23 Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press Result: x x x x (ON/OFF) button. The On/Off indicator on the unit comes on. The air conditioner runs in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. is displayed IMPORTANT 2 To select the DRY mode, press the Mode button until at the top of the wireless remote controller. You can change modes at any time. Note 3 To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive. Result: x Each time you press Temperature buttons: - The temperature is adjusted by 1OC. x The air conditioner starts removing the excess humidity. The quantity of air is adjusted automatically. In the dry mode, the fan speed is controlled automatically. Note 4 To control the direction of the air flow, refer to page 25. E-24 Airing Your Room ENGLISH If the atmosphere in your room is stale, you can air it using the FAN feature. 1 If necessary, press Result: (ON/OFF) button. x The On/Off indicator on the unit comes on. [. . . ] Secure the bio-pure filter with four screws. Reinstall the air filter, the front grille and the safety clips. yyyy ;;;; yyyy ;;;; yyyy ;;;; E-31 Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges, within which the air conditioner can be used. The automatic protection feature may be triggered and the air conditioner stopped. A water leakage or some other malfunction may happen if the heat exchanger freezes. [. . . ]