User manual LG 78402

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Airflow Direction Vertically . Adjusting the Airflow Direction Horizontally . . PROGRAMMING YOUR AIR CONDITIONER Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can select the Turbo function in the Auto, Cool and Heat mode. If you select this function in the Dry or Fan mode, the mode changes to the Auto mode. 3 Press the button again to stop the Turbo Function before the end of the 30-minute period. Result: The air conditioner is reset automatically to the previous setting. Control Panel 4 To control the airflow direction, refer to page 21. E-17 Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling. The temperature range decreases in order to perform this function. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. Press the Result: The indoor unit beeps. The air conditioner runs in the Energy Saving Function. The outer airflow blade moves up and down. To stop the Energy Saving Function, press the Note You can select the Energy Saving Function only in the Cool mode. 3 button to adjust the temperature until the required Press the temperature is displayed. You can set the temperature between 26°C and 30°C. The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 3 Press the button until the desired mode is displayed at the top of the remote control to select the mode in advance. Result: The air conditioner operates in the selected mode when it is turned on. To Cancel the On Timer 1 Press the Note button to cancel the On Timer. button, both the On Timer and the Off Timer are E-22 Setting the Off Timer ENGLISH You can set the Off Timer to turn off the air conditioner automatically at the appointed time. You can set the time from 30 minutes to 24 hours. 1 Press the button until the required time is displayed to set the Off Timer. You can set the time between 0. 5 hour and 24 hours. Press the Result: button to complete the setting. The air conditioner turns off automatically at the appointed time and the Off Timer setting disappears. 2 Example If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours during non-operation: 1. Press the Note button until `2. 0 Hr' is displayed. button until `4. 0 Hr' is displayed. button. If you would like to turn on the air conditioner and then to turn off it automatically at the appointed time by using On/Off Timer during operation, you should set the On Timer longer than the Off Timer. Caut ion Make sure that the air conditioner will not continue to run after On Timer setting is confirmed. [. . . ] Check if the air conditioner is cooling only model. Check if the remote control is for cooling only model. Check if set temperature higher(lower) than current temperature. Select the Cool, Heat, Auto or Dry mode. [. . . ]