User manual LG 921Z

[. . . ] 12) M4 x 20 Bolts for stand assembly (Refer to p. 10) Only 19/22/26/32LV2*** Only 22LK3** x4 Bolts for stand assembly (Refer to p. 12) Wall Mounting Bracket(Separate purchase) LSW100B or LSW100BG LSW200B or LSW200BG (22/26/32LK3**, 32LK4**) (42LK4**) 1 CONTENTS ACCESSORIES PREPARATION CONTENTS Front Panel Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] G Data in a USB storage device cannot be aligned. G Up to 128 English characters can be recognized as a file name. G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on. G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory. G TV need more time to detect if the storage size is bigger. If the USB memory is connected in Standby Mode, power on time would be longer than without memory. G Any device with more than the recommended capacity may not work properly. G If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to make it work properly. G When using a USB HDD via the USB extension cable, connect a support electric power source. G G 54 TO USE A USB DEVICE PHOTO LIST The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. PHOTO(*. JPEG) supporting file Baseline: Max 15360 x 8640 Min : 64x64 · Not support to progressive Jpeg · You can play JPEG files only. · Only baseline scan is supported among JPEG (SOF0, SOF1 only). The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*. MP3) supporting file Bit rate : 32 k to 320 kbps Sampling rate MPEG1 layer 3: 32 k to 48 kHz TO USE A USB DEVICE Screen Components 1 Select U S B. 2 OK OK Select MUSIC LIST. 3 2 1 2 3 Moves to upper level folder Current page/Total pages Total number of marked music title Corresponding buttons on the remote control 00:00 / 1:34 MUSIC LIST Music M002 Page 2/3 No Marked Title Duration Up Folder 4 M001 M002 M003 M004 OPTION Page Change MARK 1 Up Folder Navigation Mark Exit 4 59 TO USE A USB DEVICE Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. MUSIC LIST Music M002 Page 2/3 No Marked Title Duration Up Folder M001 M002 00:00 / 1:34 Up Folder M003 M004 Page Change MARK Navigation OPTION Mark Exit MUSIC LIST Music Music Page 2/3 No Marked Title Duration 4395KB, 1Kbps Up Folder Play Play with Photo Mark All Delete Close MARK M001 M002 00:00 / 1:34 Up Folder Navigation OPTION M003 M004 Page Change Mark Exit P l a y (During stop) : Play the selected music titles. Once a music finished playing, the next selected one will be played. When there are no selected music titles to play, the next one in the current folder will be played. G P l a y M a r k e d : Play the selected music titles. Once a music finishes playing, the next selected one will be played automatically. G S t o p P l a y (During playback) : Stop the playing music titles. G P l a y w i t h P h o t o : Start playing the selected music titles and then move to the Photo List. G M a r k A l l : Mark all music titles in the folder. G U n m a r k A l l : Deselect all marked music titles. G D e l e t e : Delete the selected music titles. [. . . ] Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF: Read Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Data 00: Normal (Power on and signal exist) Data 01: No signal (Power on) Data 02: Turn the TV off by remote control Data 03: Turn the TV off by sleep time function Data 04: Turn the TV off by RS-232C function Data 05: 5V down Data 06: AC down Data 07: Turn the TV off by Fan Alarm function (option) Data 08: Turn the TV off by Off time function Data 09: Turn the TV off by Auto off function Data a: Turn the TV off by AV board detection. * This function is "read only". 12. Remote Control Lock/Key Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Lock off Data 01: Lock on 16 . [. . . ]