User manual LG ACM0720AB

[. . . ] Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Wireless Kit OWNER'S MANUAL MODEL: ACM0720AB (ACC96T, ACC96R) Before connecting, operating or adjusting this product, please read this owner's manual carefully and completely. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. Call us and we will guide you through your first recording, for free. 1. - All these safety and operating instructions should be read before the product is operated. [. . . ] Install in accordance with the manufacturer's instructions. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Connect the DC IN connector of the Wireless TX and the Wireless TX (DC 7V OUT) connector at the main set with the DC power cable. Connect the SOUND SIGNAL connector of the Wireless TX and rear (right, left) speaker of connectors of the main set with the sound signal cable. Set the distance between this unit and Wireless RX within 10m. Front speaker (Right) Wireless TX Notes: Optimum performance can be implemented only when the Wireless TX and the Wireless RX within distance of 2m to 10m is used since communication failure may occur if longer distance is used. Be sure to match the speaker cable to the appropriate terminal on the components: + to + and ­ to ­. If the cables are reversed, the sound will be distorted and will lack base. It takes about a few seconds (and may take longer) for the Wireless TX and Wireless RX to communicate with each other. When the unit is turned off, the Wireless RX is in standby mode (off) automatically after about 10 seconds. If the Wireless RX is turned off, the wireless speaker will not function. LG Electronics, Inc. Limited Warranty - USA This LG Electronics product, will be repaired or replaced, at LG's option, if it proves to be defective in material or workmanship, under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U. S. Territories. WARRANTY PERIOD: LABOR: 90 days from the Date of Purchase. [. . . ] TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. * LED indicator - "RED" The Wireless RX is in standby mode. button (or ID button) Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer. CUSTOMER INTER-ACTIVE CENTER NUMBERS: About Ferrite Core Be sure to attach the ferrite core to the speaker cables (for connecting to this unit). [. . . ]