User manual LG ACO1560AS

[. . . ] WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] This enables playback of discs recorded in Multichannel Surround without the need for an optional decoder. For this audio connection, set the [Speaker Out] option to [5. 1CH] and make the appropriate [5. 1 Speaker Setting] option on the setup menu. (See page 18. ) Rear of the player L 2CH AUDIO OUT 5. 1CH AUDIO OUT FRONT R F L REAR R R CENTER WOOFER Front R Front L Rear R Rear L Center Subwoofer C Amplifier (Receiver) ANALOG 5. 1CH AUDIO INPUT 14 BH100-E2-AA2RLLB-ENG 4/26/07 10:36 AM Page 15 Resolution Setting The player provides several output resolutions for HDMI and COMPONENT VIDEO OUT jacks. You can change the resolution using SETUP menu or pressing the RESOLUTION button in complete stop mode. 1080p ­ Outputs 1080 lines of progressive video. (only for HDMI connection and BD-ROM/HD DVD discs recorded in 1080p) 1080i ­ Outputs 1080 lines of interlaced video. 720p ­ Outputs 720 lines of progressive video. 576p ­ Outputs 576 lines progressive video. 576i ­ Outputs 576 lines of interlaced video. (Only resolution available on VIDEO OUT, not available on HDMI connection) Available resolution according to connection HDMI connection · BD-ROM / HD DVD playback: 1080p, 1080i, 720p and 576p are all available. · DVD playback: 1080i, 720p and 576p are available. To go to the next level: Press B on the Remote Control. To go back to the previous level: Press b on the Remote Control. Display Menu TV Aspect 4:3 ­ Select when a standard 4:3 TV is connected. (4:3 can be affected only when the resolution is 576i or 576p. ) 16:9 ­ Select when a 16:9 wide TV is connected. Display Mode Display Mode setting is available only when the TV Aspect mode is set to [4:3]. Letterbox ­ Displays a wide picture with bands on the upper and lower portions of the screen. Pan Scan ­ Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Notes: · Display Mode may not be supported on a HD DVD title. · The Pan Scan option does not operate during BD-ROM playback. Resolution Sets the output resolution of the Component and HDMI video signal. The number in 576i, 576p, 720p, 1080p and 1080i indicates the number of lines of video. The "i" and "p" indicate interlaced and progressive scan, respectively. [. . . ] · The [Audio] options are set to the wrong position. The player does not start playback. · An unplayable disc is inserted. · The rating level is set. The Remote Control does not work properly. · The Remote Control is not pointed at the remote sensor on the player. · The Remote Control is too far from the player. Maintenance and Service Refer to the information in this chapter before contacting a service technician. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. [. . . ]