User manual LG AG1AC17BKM01

[. . . ] Do not let water come into contact with the product when cleaning it. Ensure that water does not enter the product. This may result in electric shock or fire. Since the lens of the product is easily scratched, make sure to clean the product with a soft cloth. [. . . ] Since the lens of the product is easily scratched, make sure to clean the product with a soft cloth. As the product may be scratched if there is any foreign material on the cloth, make sure to shake off any dust before using it. Do not scratch the surface of the Liquid crystal shutters with a sharp tool and do not clean it using chemicals. Do not apply force to the liquid crystal shutter. When watching 3D video, ensure that you are viewing the video within the specified receiving range. (For more information, refer to the specifications in this manual) If the receiving range is out of the specified range, the screen may not be viewable as 3D video. Flickering may be generated by the 3D glasses (60 Hz) when watching the 3D screen when a magnetic fluorescent lamp (50 Hz) is on. If you encounter this symptom, please turn off the light and continue watching. 12 2 13 3 4 14 5 15 16 6 7 8 17 The following people should not use this product: Pregnant women, infirm persons, persons with heart issues, as well as persons that become nauseous easily. People with these conditions should not use this product. When watching 3D video, do not place anything nearby that can be easily broken. When the battery is discharged: The LED blinks for 1 minute and turns off automatically. !CAUTION The 3D glasses do not work while charging them with the USB cable. If you use a USB cable other the one (8-pin mini USB) supplied with the product, the product may be damaged. This equipment shall be powered with USB 2. 0 or higher. TROUBLESHOOTING Problem. The battery (Lithium Polymer) may be discharged, charge the Q. The glasses do not work. battery with the 8-pin mini USB cable. Check the 3D function settings of your TV. A. This occurs when the battery (Lithium Polymer) is discharged. The led LED blinks continuously. this case, charge the battery with the supplied 8-pin mini USB cable. Q. Check if the 8-pin mini USB cable is properly connected to the 8-pin mini USB cable, but it is product. not charged. 4 SPECIFICATIONS AG-S230 / S250 AG1AC17BKM01 Liquid crystal Max. 2000:1 Over 34 % 120 fields/s Under 2. 0 ms Under 0. 3 ms About 47 g · USB Cable: 8-pin mini USB cable · Battery: 75 mA/h · Operating time when On: About 40 hours 0 °C to 40 °C -20 °C to 60 °C Shutters Contrast Ratio ENGLISH Transmittance Field Rate Open Time Close Time Weight Liquid crystal Max. [. . . ] Check if the 8-pin mini USB cable is properly connected to the 8-pin mini USB cable, but it is product. not charged. 4 SPECIFICATIONS AG-S230 / S250 AG1AC17BKM01 Liquid crystal Max. 2000:1 Over 34 % 120 fields/s Under 2. 0 ms Under 0. 3 ms About 47 g · USB Cable: 8-pin mini USB cable · Battery: 75 mA/h · Operating time when On: About 40 hours 0 °C to 40 °C -20 °C to 60 °C Shutters Contrast Ratio ENGLISH Transmittance Field Rate Open Time Close Time Weight Liquid crystal Max. 1000:1 Over 34 % 120 fields/s Under 2. 0 ms Under 0. 3 ms About 36 g · USB Cable: 8-pin mini USB cable Power Supply · Battery: 80 mA/h · Operating time when On: About 40 hours Operating Temperature Storage Temperature 0 °C to 40 °C -20 °C to 60 °C The images and specifi cations presented in this user manual are subject to change without prior notice for quality improvement purposes. Class B ITE (Information Technology Equipment) This equipment satisfies the EMC requirements and is intended for use in all environments, including the domestic environment. (Class B ITE produces less electromagnetic emissions than Class A ITE. ) 5 This device complies with Part 15 of the FCC Rules. [. . . ]