User manual LG AGF05LHG1

[. . . ] The illustrations in this manual may differ from the actual product and accessories. ENGLISH ENG Remote control and Batteries Power Cord User Manual/Card 15-pin D-SUB Signal Cable CAUTION Do not use any pirated items to ensure the safety and product life span. yy Any damages or injuries by using pirated items are not covered by the warranty. yy NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. ASSEMBLING AND PREPARING 5 Optional Accessories ENG ENGLISH Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. [. . . ] "Wait for IP Setup" is displayed for up to 40 seconds. * If Network select is set to RS232C. DHCP and Manual are disabled. Select this option to return to the default factory settings. Factory Reset 24 CUSTOMIZING SETTINGS Tile Mode Configuration of an integration screen is available as well as configuration of One by one Display. • Off: When the Tile Mode option is disabled • 2X1: When using 2 monitors • 2X2: When using 4 monitors • 3X3: When using 9 monitors ENGLISH ENG ID 1 ID 2 ID 1 ID 3 ID 2 ID 4 ID 1 ID 4 ID 2 ID 5 ID 3 ID 6 Tile ID ID 7 ID 8 ID 9 • 4X4: When using 16 monitors • 5X5: When using 25 monitors ID 1 ID 5 ID 2 ID 6 ID 10 ID 14 ID 3 ID 7 ID 11 ID 15 ID 4 ID 8 ID 12 ID 16 ID 1 ID 6 ID 11 ID 16 ID 21 ID 2 ID 7 ID 12 ID 17 ID 22 ID 3 ID 8 ID 13 ID 18 ID 23 ID 4 ID 9 ID 14 ID 19 ID 24 ID 5 ID 10 ID 15 ID 20 ID 25 ID 9 ID 13 Tile Mode - Natural mode To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Before After CUSTOMIZING SETTINGS 25 INFORMATION settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press SET. INFORMATION ENG ENGLISH 3 Press the Navigation buttons to scroll to the setting or option you want and press SET. - To return to the previous level, press . Set ID Serial No. SW Version IP Address MAC Address 4 When you are finished, press EXIT. The available option settings are described in the following: Setting Set ID Description MENU You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. This menu shows the serial number of the product. Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided  yy by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. 30 TROUBLESHOOTING 'Unknown Product' message appears when the product is connected. Problem Did you install the driver?Resolution ENGLISH ENG Install the product driver, which is provided with the product, or yy  download it from the web site. (http://www. lg. com) See if the plug&play function is supported by referring to the video yy  card user manual. 'Key Lock On' message appears. Problem The 'Key Lock On' message appears when pressing the Menu button. Resolution yy The Lock function prevents the OSD settings from being changed inadvertently. To release the lock, go to Menu and Option and disable the Key Lock option. The screen image looks abnormal. Problem Is the screen position wrong?Resolution yy D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. yy See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. [. . . ] Transmission [f][h][ ][Set ID][ ][Data][Cr] Data : 00H to 64H (Data value) * Refer to 'Real data mapping ’. See p. 39 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] RS-232C 45 38. Language (Command: f i) Set the OSD language. Transmission [f][i][ ][Set ID][ ][Data][Cr] Data 0 : English 1 : French 2 : German 3 : Spanish 4 : Italian 5 : Portuguese 6 : Chinese 7 : Japanese 8 : Korean 9 : Russian Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 41. [. . . ]