User manual LG AGW06LHG1

[. . . ] All safety messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING, CAUTION. These words mean: You will be killed or seriously injured if you don't follow instructions. You can be killed or seriously injured if you don't follow instructions. Indicates an imminently hazardous situation which, if not avoided, may result in minor or moderate injury, or product damage only. DANGER WARNING CAUTION All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. w DANGER: RISK OF CHILD ENTRAPMENT Child entrapment and suffocation are not problems of the past. [. . . ] Freezing Your freezer will not quick-freeze any large quantity of food. Do not put more unfrozen food into the freezer than will freeze within 24 hours. Leave enough space in the freezer for air to circulate around packages. Be careful to leave enough room at the front so the door can close tightly. Storage times will vary according to the quality and type of food, the type of packaging or wrap used (airtight and moisture-proof) and the storage temperature. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals. NOTE: Allow hot foods to cool at room temperature for 30 minutes, then package and freeze. Cooling hot foods before freezing saves energy. 20 USING YOUR REFRIGERATOR REFRIGERATOR SECTION REFRIGERATOR SHELVES The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model may have glass or wire shelves. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier; it will also reduce the amount of time the refrigerator door is open, saving energy. Set control level to COLD (print on surface) to provide normal refrigerator temperature. Use the COLDER (print on surface) setting for meats or other deli items. NOTE: Cold air directed to the Glide`N'Serve can decrease refrigerator temperature. Refrigerator control may need to be adjusted. To replace Glide`N'Serve 1 To remove the glass 1. Lift up the glass under the crisper cover. To remove, pull the drawer out to full extension. Lift the front of the drawer up, then pull it straight out. To install, slightly tilt up the front and insert the drawer into the frame and push it back into place. 22 USING YOUR REFRIGERATOR MODULAR DOOR BIN The door bins are removable for easy cleaning and adjusting. To remove the bin, simply lift the bin up and pull straight out. To replace the bin, slide it in above the desired support button and push down until it stops. UTILITY BIN Store the utility bin on interior shelf, not on door shelf. [. . . ] Door left open. Wait 24 hours after hook-up for ice production. See the Setting the Controls section on page 18. Check to see if something is holding the door open. Smaller cube size level is selected. Water shutoff valve connecting refrigerator to water line may be clogged. [. . . ]