User manual LG ALG4020

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LG ALG4020. We hope that this LG ALG4020 user guide will be useful to you.

Lastmanuals help download the user guide LG ALG4020.

Download

Manual abstract: user guide LG ALG4020

Detailed instructions for use are in the User's Guide.

 [. . . ] E-8 · ADJUSTING THE AIR FLOW DIRECTION . . . . . E-10 · 10°C OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-11 · FULL POWER OPERATION . . . . . . . . . . . . . . . . . . . . E-11 · ONE-HOUR OFF TIMER . . . . . . . . . . . . . . . . . . . . . . . . . .  [. . . ] the cover. 
+ -

3 Reinstall

+

NOTES:
· The battery life is approximately one year in normal use. · When you replace the batteries,  always change both batteries,  and make sure they are the same type. · If the remote control does not operate properly after replacing the batteries,  take out the batteries and reinstall them again after 30 seconds. · If you will not be using the unit for a long time,  remove the batteries from the remote control. 

HOW TO USE THE REMOTE CONTROL
Point the remote control towards the unit's signal receiver window and press the desired button. The unit generates a beep when it receives the signal. 
· Make sure there is no curtain or other object between the remote control and the unit. · The remote control can send signals from up to 7 metres away. 

E-6

CAUTION
· Do not allow the signal receiver window to receive strong direct sunlight,  since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight,  close a curtain to block the light. · Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. · The unit can be affected by signals transmitted from the remote control of a television,  VCR or other equipment used in the same room. · Do not leave the remote control in direct sunlight or near a heater. Also,  protect the unit and remote control from moisture and shock which can discolour or damage them. 

SET CURRENT CLOCK TIME
There are two clock modes: 12-hour mode and 24-hour mode. Utilize the operation at seasonal change over terms. Mold fungus already grown can not be eliminated by this operation. 

E-12

PLASMACLUSTER OPERATION
You can choose AIR CLEAN OPERATION or ION BALANCE OPERATION

1 During operation,  press the PLASMACLUSTER button to select the mode. 
AIR CLEAN REMOTE CONTROL DISPLAY PLASMACLUSTER lamp on the unit ION BALANCE CANCEL BLUE lamp light up GREEN lamp light up Lamp goes off

1
DISPLAY

· In the AIR CLEAN operation,  the blue PLASMACLUSTER lamp on the unit will light up. · In the ION BALANCE operation,  the green PLASMACLUSTER lamp on the unit will light up. 

TO CANCEL
Press the PLASMACLUSTER button until PLASMACLUSTER symbol on the remote control display goes off. 

NOTES:

· The PLASMACLUSTER lamp on the unit will turn off. 

· Setting of the PLASMACLUSTER operation will be memorized and will operate in the same mode,  the next time you turn on the air conditioner. · To turn off the PLASMACLUSTER lamp,  press the DISPLAY button. · When the PLASMACLUSTER button is pressed while the unit is not operating,  the PLASMACLUSTER operation will be performed without accompanying air conditioning mode (eg,  HEATING or COOLING). The mode symbol of the remote control will go off and the fan speed can not be set AUTO. 

SELF CLEAN OPERATION

1 Press the SELF CLEAN button when the unit is not operating. 
· The remote control displays " ". · The red OPERATION lamp ( ) and the blue PLASMACLUSTER lamp on the unit will light up. · The unit will stop operation after forty minutes. · The remaining operation time will be indicated on the TEMPERATURE INDICATOR of the indoor unit in minute decrements. 

MODE

1h

TO CANCEL

CLEAN FAN

1

Press the SELF CLEAN button. Or,  turn the unit off by pressing the ON/OFF button. 
· The red OPERATION lamp ( ) and the blue PLASMACLUSTER lamp on the unit will turn off. 

NOTE:
· You cannot set the temperature,  fan speed,  air flow direction or timer setting during the SELF CLEAN operation. 

E-13

ENGLISH

TIMER OPERATION
NOTE:
Before setting the timer,  make sure the clock is properly set with the current time. 

TIMER OFF
) button. 1 Press the TIMER OFF ( 2 The TIMER OFF indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the desired time.  [. . . ] 3 Close the left cover until it clicks. 

Hole

1
Shaft Shaft Receiver

2

2

5 Connect the poweroncord to the wall outlet or turn the circuit
breaker. 

3
Cover

E-18

ADDITIONAL NOTES ON OPERATION
OPERATING TEMPERATURE RANGE
INDOOR TEMP. upper limit COOLING lower limit HEATING D. B. = Wet-bulb
32°C 23°C 21°C 15°C 27°C D. B. · The built-in protective device may prevent the unit from operating when used out of this range.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG ALG4020

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LG ALG4020 will begin.