User manual LG AN110B

[. . . ] 2-13 Connecting an HDMI-Compatible Device . 2-14 Connecting an AV device using a D-Sub cable . 2-15 Connecting an AV device with component output . 2-16 Connecting using a Video/S-Video cable . [. . . ] When the input signal is a PC Timing (D-Sub/HDMI) signal, <Zoom1>/<Zoom2> is not supported. · Position <Normal> - <Zoom1> - <Zoom2> - <16 : 9> Using this function, you can adjust the screen position if it is not aligned. Using 3-5 MENU Digital NR DESCRIPTION If dotted lines appear in an image or the screen shakes, enabling Digital NR (Noise Reduction) can improve the quality of the picture. When the input signal is a PC Timing (D-Sub/HDMI) signal, <Digital NR> does not operate. Black Level If the black level is unsuitable for the input signal, the dark parts of an image may look unclear or dim. Using this function, you can select a black level that can improve the visibility of the dark parts. The <Black level> can only be set for the 480i and 576i RGB signals in the [AV], [S-Video], and AV Timing (D-Sub) modes. For [AV], [S-Video], and the 480i and 576i signals of AV Timing (D-Sub). · · · · <0 IRE> : Sets the black level to <0 IRE>. <7. 5 IRE> : Sets the black level to <7. 5 IRE>. <Normal> : Used in a normal environment. <Low> : Used when the dark parts of an image are too bright. For the RGB signal of <HDMI> mode. Overscan Using this function, you can cut off the edge of a picture when unnecessary information or images appear on the edge of the picture. Overscan is not supported in [AV] and [S-Video] modes. · <Logo> - <Blue> - <Black> Test Pattern A default test pattern built into the projector. You can use it as a reference picture to optimize the installation of the projector and to optimize images. · · <Crosshatch> : You can check whether the picture is distorted or not. <Screen Size> : You can reference and display picture format sizes such as 1. 33 : 1 or 1. 78 : 1. Using 3-5 MENU Video Type DESCRIPTION If the screen quality is abnormal as a result of the projector not identifying the input signal type automatically in <PC> or <HDMI> mode, <Video Type> lets you manually set the input signal. · In <PC> mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V sync, it is only enabled for a 1280 x 720p 59. 94Hz/60Hz signal. · · <Auto> - <RGB(PC)> - <RGB(AV)> - <YPbPr(AV)> In <HDMI> mode, the menu is only enabled for 640x480p 59. 94Hz/60Hz and 1280x720p 59. 94Hz/60Hz among AV Timing(HDMI) signals. · <Auto> - <PC> - <AV> Usage RGB(PC) When connecting the RGB output of a PC to the D-Sub terminal When connecting the RGB output of an AV device (STB, DVD, etc. . . ) to the D-Sub terminal Color, Sharpness, Tint PC menu Enabled zoom Enabled Disabled RGB(AV) Enabled Disabled Disabled When connecting the YPbPr output of YPbPr(AV) an AV device (STB, DVD, etc. . . ) to the D-Sub terminal PC When connecting a PC to the HDMI terminal When connecting an AV device (STB, DVD, etc. . . ) to the HDMI terminal Auto settings Enabled Disabled Disabled Disabled Enabled - Disabled Disabled - Enabled Disabled - AV Auto Caption The <Caption> function is supported when the external analog signal (from either the Video or SVideo terminal) contains subtitles. · · · · <Caption> : <Off> - <On> <Mode> : <Caption> - <Text> <Channel> : <1> - <2> <Field> : <1> - <2> The <Caption> function will not operate in <PC> (including components) or <HDMI> mode. Depending on the external signal, a change to the <Channel> or <Field> settings may be required. Each <Channel> and <Field> contains different information. [. . . ] USB Connecting a USB Storage Device and Precautions" before operating the USB. The font of documents look different from the original one. The connected USB doesn't work. Files are not copied even though there is enough space in the internal memory. Available space could be smaller than the files you intend to copy, delete other files and try to copy. (Available storage capacity is 59MB) 5-1 Troubleshooting 6 6-1 More Information Specifications MODEL Panel Size Resolution Aspect ratio Power Power Consumption SP-L255 0. 63 inches 3P LCD XGA (1024 x 768) 4:3 265W (Standby : under 1W) Voltage Lamp Power Consumption 290W (Standby : under 1W) 290W (Standby : under 1W) 290W (Standby : under 1W) AN110B 0. 63 inches 3P LCD SP-L335 0. 63 inches 3P LCD with MLA SP-L355 0. 63 inches 3P LCD with MLA 100~240V AC, 50/60Hz 202W (Eco :172W) 220W (Eco : 152W) 220W (Eco : 152W) 220W (Eco : 152W) Life Time 3, 000 Hours (Eco : 5, 000 Hours) 2, 000 Hours (Eco : 2, 500 Hours) Dimension (Width x Height x Depth) Weight Brightness Contrast Screen Size (Diagonal) Key Features Projection Range Keystone Network Zoom Adjustment Focus Adjustment Lens Zoom Ratio Input signal D-Sub 15p HDMI Mini DIN x 1 RCA x 1 Media Play Speaker User Environment Temperature and Humidity 291 mm x 289 mm x 127 mm / 11. 46 x 11. 38 x 5 inches 3. 8 Kg / 8. 4 lbs 2500 ANSI 500:1 3000 ANSI 500:1 3300 ANSI 400:1 3500 ANSI 400:1 Diagonal 40 inches ~ 300 inches 1 ~ 10 m Auto : Vertical(±20°) / Manual: Vertical (±20°) RJ 45, 10Mbps Manual Manual F=1. 65~1. 93, f=18. 5mm~22. 5mm 1:1. 2 Analog RGB, analog YPbPr Digital RGB, digital YCbCr S-Video Composite video USB supports 3W x 2 (Stereo) Operating : Temperature 41 °F ~ 95 °F (5 °C ~ 35 °C), Humidity 20 % ~ 80 % (Non-condensing) Storage : Temperature 14 °F~140 °F (-10 °C ~ 60 °C), Humidity 10 % ~ 90 % (Non-condensing) Noise Eco : 30dB, Normal : 32dB, Bright : 35dB More Information 6-1 This Class B equipment is designed for home and office use. The equipment has been registered regarding EMI for residential use. Class A is for business while class B emits less electromagnetic waves than class A. [. . . ]