User manual LG ARNU18GTEA2

[. . . ] ⷠDo not use any combustible equipment in front of the airflow outlet. ⷠDo not expose directly to cold air for a long period. Switch off the power supply and unplug before cleaning or servicing. ⷠTurn off the power supply and unplug if the unit is not used for a long period of time. [. . . ] ⷠDo not share the same power outlet with other equipment. ⷠDo not modify power cords. ⷠDo not operate or stop the unit by inserting or pulling out the power plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. ⷠDust on the electric power plug should be periodically wiped with a dry cloth. ⷠIn case of emergency or abnormal conditions (burning, unusual odour, etc), turn off the power supply and unplug. ⷠDo not sit or place anything on the outdoor unit. After long periods of use, make sure the installation rack is not damaged. "Instructions for end-user" for air conditioners: Information on Disposal in other countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your installer, dealer or local authority and ask for the correct method of disposal. Use this air conditioner under the following temperature range. This can save electricity while you are going out or sleeping. ⷠThe timer indicator of the indoor unit will light up during the timer operation. ⷠIf you press operation button during the timer setting operation, timer setting will be cancelled. ⷠWhen a power failure occurs, the timer setting will be cancelled. Temperature setting of 1°C higher in cool mode or 2°C lower in heat mode than the desired temperature performs a 10% power saving. To reduce power consumption during cool mode, close the curtains to prevent the sunlight and heat from coming in. Switch off the power supply before cleaning It is recommended to clean air filters once every 2 weeks. Dry the filters thoroughly under the shade, away from fire or direct sunlight. INDOORUNIT Wipe the unit gently with a soft, dry cloth. Step 1 2 Press once Action Press and hold until you hear one beep, then release Repeat the above step if you want to switch on the signal receiving sound. To switch on the auto restart control, repeat the above step. [. . . ] The unit operates automatically when power is resumed after a power failure. This may due to damp smell emitted by the wall, carpet, furniture or clothing. Operation will be restarted automatically under the previous operation mode and airflow direction when power is resumed as the operation is not stopped by remote control . to cancel the Auto Restart Control , please refer to page 6. [. . . ]