User manual LG AVS2400

[. . . ] OWNER'S MANUAL Video Conference Monitor Please read this manual carefully before operating your set and retain it for future reference. MODEL AVS2400 P/NO : COV30805901 1101(V1. 5) 2 Safety Information 1 Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] If the gatekeeper administrator assigns an H. 323 ID for the system, enter that ID for the H. 323 Name preference. The H. 323 Extension preference is an optional value that is used when a gatekeeper is configured and requires the system to register with an E164 number or extension. If the gatekeeper administrator assigns an E164 number or extension for the system, enter that number for the H. 323 Extension preference. Set the Gatekeeper ID only if the gatekeeper requires it (for example, configurations with multiple gatekeepers). The Gatekeeper ID must match the gatekeeper ID configured for the gatekeeper to which the system is registering. Do not configure this preference if the gatekeeper does not require it, as this may result in failure to register with the gatekeeper. Set the Gatekeeper Mode preference to Auto if you wish to have the system automatically discover a gatekeeper. You can also set the Gatekeeper Mode preference to Manual to manually choose a gatekeeper. If set to Manual, specify the IP address and port for the primary gatekeeper. When you select the Register button in Administrator Preferences : Communications : H. 323, icons appear in the status bar to indicate the status of the registration process with the H. 323 gatekeeper. The yellow H. 323 icon your system is trying to register with the gatekeeper. If the registration fails, the red H. 323 icon is registered to a gatekeeper, the system displays its status. Configuring a secondary H. 323 gatekeeper with the Gatekeeper IP Address 2 and Gatekeeper Port 2 preferences is optional. If the system Installation 43 Enabling H. 460 Support for H. 323 Calls This system supports the H. 460 protocol for firewall and NAT traversal of H. 323 calls. You must have an H. 460 server configured in your environment for this feature to function properly. NOTE If you configure H. 323 settings and enable H. 460 support, the system ignores preferences in Administrator Preferences : Network : NAT. To enable H. 460 client support on a system, configure the H. 323 preferences in Administrator Preferences : Communications : H. 323 with the following exceptions: · · · · Choose Manual for the Gatekeeper Mode preference. For the Gatekeeper IP Address 1 and Gatekeeper Port 1 preferences, enter the IP address and port number of the H. 460 server that is configured in your environment. Choose Enabled for the H. 460 preference. Navigate to Register and click OK. 3 Installation NOTE If you enable H. 460 and specify the IP address and port number of a secondary gatekeeper with the Gatekeeper IP Address 2 and Gatekeeper Port 2 preferences, the system ignores the secondary gatekeeper. Configuring SIP Settings By default, support for Session Initiation Protocol (SIP) is enabled on the system. To configure SIP as the protocol to use for placing calls, configure SIP preferences in Administrator Preferences : Communications : SIP. You can also disable support for SIP by choosing Disabled for the SIP preference when the system is not in a call. If you choose Disabled for the SIP preference, the system cannot place or receive calls with the SIP protocol. NOTE If both H. 323 and SIP preferences are set to Disabled, a warning message appears and indicates that video calls cannot be placed or received with this configuration. [. . . ] The right to request sight of the original proof of purchase is reserved. 3 months for Software It is the user's responsibility to ensure that the product is used in accordance with the Manufacturer's guidelines detailed in the Instruction Manual supplied with your Video Conference Monitor. Failure to do so may invalidate your Warranty. All warranties will be immediately invalidated if unauthorized repairs or modifications are made to the monitor or in any case of accident, misuse, damage caused by improper installation and altered serial numbers. [. . . ]