User manual LG BC999NI

[. . . ] D It is recommended to contact a service center directly. When opening or closing the front panel, use a stable stool and watch your steps carefully. ever spill any kind of liquid on the air conditioner. N DURING OPERATION If this happens, unplug or turn off the air conditioner and contact an authorized service center. o not insert anything between the airflow blades to prevent damage D of the inner fan and consequent injury. Keep children away from the air conditioner. o not place any obstacles in front of the air conditioner. [. . . ] Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. E button: Result: ach time you press the - The temperature is adjusted by 1°C - The indoor unit beeps he air conditioner starts dehumidifying and the fan speed is T adjusted automatically. 4 To control the airflow direction, refer to pages 16 and 17. E-12 AQ30_36W_IB_E_28065A. indd 12 2007-6-27 13:29:33 Selecting the Fan Mode You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. You can set the time between 1 hour and 24 hours. 2 Press the button to complete the setting. Result: The remaining time is displayed. The air conditioner turns off automatically at the appointed time and the Off Timer setting disappears. Example If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the button until `2. 0 Hr' is displayed. Press the button until `4. 0 Hr' is displayed. Note You can check or change the mode and/or the temperature by pressing the button or the button after setting the Off Timer. To Cancel the Off Timer 1 Press the Note button to cancel the Off Timer. button, both the On Timer and the Off Timer E-19 AQ30_36W_IB_E_28065A. indd 19 2007-6-27 13:29:43 Setting the Sleep Timer You can set the Sleep Timer to turn off the air conditioner automatically while you are sleeping. The air conditioner stops operating 6 hours after you set the Sleep Timer. 1 Press the button until the indicator appears on the remote control. The air conditioner will be controlled as indicated in the illustrations below. Note You can set Sleep Timer only in the Cool or Heat mode. Cooling The set temperature is increased by 1°C every hour. [. . . ] Replace the remote control batteries if necessary. Check if the correct operating mode has been selected (Auto, Cool, Heat). The room temperature may be too low or too high. Check if the air filter is dirty; refer to page 25 for cleaning instructions. [. . . ]