User manual LG BD260F

[. . . ] Never remove the back cover of your VCR as this can expose you to very high voltage and other hazards. If your VCR does not operate properly, please check the Troubleshooting Check List (see p. If your VCR still does not operate properly, unplug it and call your dealer. Ensure that your VCR is placed in a position to allow a free flow of air. This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. 2 · ez (easy) operations (see p. [. . . ] (BC493Y/BD470Y/BC450Y): During playing back or still picture press F or G. P/STILL REW FF PLAY STOP CM (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume normal playback. While tape is playing press CM SKIP on the remote control to skip commercial (or another programme material). 7 8 0 LP OPR (Optimum Picture Response): This feature automatically improves playback picture quality by adjusting your VCR to the condition of the tape. Press D or E repeatedly to select: OFF, SOFT or PSET ACMS RSOFT You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) To switch off the slow motion and shuttle, press the desired function. During slow motion and shuttle, the noise bars may appear on the picture according to the status of tape. If distortions can be seen in the picture, reduce them with D or E. 16 REC/ ITR Press EJECT. EJECT POWER CLEAR 9 CM SKIP If the end of the tape is reached, your VCR will stop playback automatically, rewind, stop, eject the tape and place itself into power off. TV/VCR OFF 12 Pr-12 REC SHOWVIEW AV AUDIO fSHARP OSD ON OFF 16:9 4:3 TIME DATE SYSTEM AB C VCR OSD DR OPR OPR i Repeatedly press CM SKIP to skip material: 1 Press 30 seconds 2 Press 60 seconds 3 Press 90 seconds 4 Press 120 seconds 5 Press 150 seconds 6 Press 180 seconds SHARP. Please note you may only set OPR to on when playing a tape. Press i to remove the menus. Setting the colour system Your VCR is equipped with triple colour standard, you can play back a tape in PAL B/G and SECAM D/K. During playback your VCR detects the colour system automatically. If there are colour problem please select the colour system manually. Press i. The main menu will appear on the TV screen. Press OK. Press D or E to select according to the COLOUR system used. WEEKLY: To record at the same time every week. DAILY: To record every day (except Saturday and Sunday) at the same time. 7 TV/VCR 8 0 LP 9 CM SKIP Press the numbered buttons to enter the ShowView Code of the TV programme that you wish to record. If you make a mistake press F then enter the revised number. SHOWVIEW VIDEO Plus+ AV C. LOCK ENR/ DEP 1 CLEAR 2 5 8 0 3 6 9 CM SKIP 4 OK i 7 CLK/CNT TV/VCR ----------RECORD : ONCE SHOWVIEW 0~9, OK i ----------RECORD : ONCE SHOWVIEW 0~9, OK i 246876543 RECORD : ONCE SHOWVIEW 0~9, OK i 21 ShowView Programming (BC493Y) SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW System is manufactured under licence from Gemstar Development Corporation. Press OK. If PLEASE CHECK is displayed it means that you have entered the wrong ShowView number, entered the ShowView number incorrectly. If "- -" is displayed, you have to enter the programme number of the station, you want to record from. CLEAR Press F or G to select the settings that you wish to revise. Press D or E to enter the correct information. If you want to make another ShowView recording repeat stages SP will produce improved 2 - 7. picture and sound quality, however LP will proPress i twice. vide twice as much recording time as SP. If PLEASE CHECK is displayed, you have Check that the timer entered incorrect event details are correct. information and will need to re-enter the data. [. . . ] 16 Watts (Energy saving mode: 3 Watts) Video Head System Double azimuth 4 heads, helical scanning. (BC493Y/BC450Y/BD470Y) Rotary 2 heads, helical scanning (BC270Y/BC250Y) Tape speed 23. 39 mm/sec (SP mode)/ 11. 69 mm/sec (LP mode). Tape format Tape width 12. 7 mm (0. 5 inch). Maximum recording 4 hours (SP mode, E-240 tape)/ time 8 hours (LP mode, E-240 tape). [. . . ]