User manual LG BD268I

[. . . ] WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. [. . . ] [192 kHz] Select this if your A/V Receiver or Amplifier is capable of handling 192 kHz signals. Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. [LOCK] Menu The [LOCK] settings affect only Blu-ray Disc and DVD playback. To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Password You can create or change the password. [None] Enter a 4-digit password twice, and press ENTER (b) to create a new password. [Change] Enter the current password and press ENTER (b). Enter a 4-digit password twice, and press ENTER (b) to create a new password. If you forget your password If you forget your password, you can clear it using the following steps: 1. Remove any disc that might be in the player. Select [Password] option in the [Setup] menu. Some functions can be restricted depending on many factors. y Depending on the BD-ROM titles, a USB device connection may be needed for the proper playback. y Unfinalized DVD VR format discs may not be played in this player. y Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs. , Note Playing a file on a disc/USB device yui 4 Operating a [Movie] - Plays video contents. d [Setup] - Adjusts the system settings. This player can play video, audio and photo files contained in the disc or USB device. Insert a data disc on the tray or connect a USB device. ( When you insert the USB device, the USB option menu will be appeared to select for [Movie], [Photo] or [Music]. Select [Movie], [Photo] or [Music] using a/d, and press ENTER (b). Select [Data] or [USB] option using w/s, and press ENTER (b). [. . . ] (Except LPCM Codec : the output always includes interactive and secondary audio. ) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. *3 If the [HDMI] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5. 1Ch. If the [HDMI] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BDROM discs, and the original audio is outputted for the other discs (like [Primary Pass-Thru]). y The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44. 1kHz/16 bit for Audio CD while playback. y You must select an audio output and a maximum sampling frequency that your Amplifier (or AV receiver) accepts using, [HDMI] and [Sampling Freq. ] options on the [Setup] menu (see page 20). [. . . ]