User manual LG BDE-103

[. . . ] Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. [. . . ] The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] ­ Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. Note: You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. Resolution Sets the output resolution of the HDMI video signal. Refer to "Resolution Setting" on page 15-16 for details about the resolution. [Auto] ­ If the HDMI OUT jack is connected for TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. Notes: · When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. · Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080/24p, the actual frame frequency of the video output will be 50Hz or 60Hz to match the video source format. · When the 1080p/24Hz video source is outputted via HDMI connection, the VIDEO OUT will not output any video signal. HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. DRC (Dynamic Range Control) When a disc encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Note: The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode. [LOCK] Menu (Parental Control) The [LOCK] settings affect only BD and DVD playback. To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password and press ENTER. Enter it again and press ENTER to verify. Password You can create, change or delete the password. [New] ­ Enter a 4-digit password and press ENTER. Enter it again and press ENTER to create a new password. [Change] ­ Enter the current password and press ENTER. Enter a 4-digit password and press ENTER. [. . . ] · The power of the equipment connected with the audio cable is turned off. · The [AUDIO] options are set to the wrong position. · The player is in reverse play, fast forward, slow motion or pause mode. The player does not start playback. · The disc is upside down. · An unplayable disc is inserted. [. . . ]