User manual LG BDE-103-A

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. [. . . ] [4:3 Pan Scan] ­ Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. [16:9 Wide] ­ Select when a 16:9 wide TV is connected. Resolution Sets the output resolution of the Component and HDMI video signal. Refer to "Resolution Setting" on page 17 for details about the resolution. 1080p Display Mode When the resolution is set to 1080p, select [24Hz] for smooth presentation of film material (1080/24p) with an HDMI-equipped display compatible with 1080/24p input. Notes: · When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. · Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080/24p, the actual frame frequency of the video output will be 50Hz or 60Hz to match the video source format. HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] ­ Select when connecting to a HDMI display device. [RGB] ­ Select when connecting to an RGB display device. General Operation 1. This allows you to listen to a movie at a lower volume without losing clarity of sound. Note: The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode. [AUDIO] Menu Each disc has a variety of audio output options. Set the player's Audio options according to the type of audio system you use. Note: Since many factors affect the type of audio output, see "The unit's Audio Output Specifications" on page 39 for details. HDMI / SPDIF (Digital Audio Output) Select the output sound format when a device equipped with a HDMI or Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO OUT jack on this player. 20 [LOCK] Menu (Parental Control) The [LOCK] settings affect only BD and DVD playback. Rating Blocks playback of rated disc based on their content. Select [Rating] on the [LOCK] menu then press B. To access this option, you must input the password you have created. If you have not yet entered password, you will be prompted to do so. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. Password You can enter or change the password. Select [Password] option on the [LOCK] menu then press B. To create new password, press ENTER when the [New] option is highlighted. [. . . ] To obtain the latest software for this player (if updates have been made), please visit http://fr. lgservice. com or contact LG Electronics customer care centre. 37 Reference · Operate the Remote Control closer to the player. Specifications General Power requirements: Power consumption: Dimensions (W x H x D): Net Weight (Approx. ): Operating temperature: Operating humidity: AC 200-240 V~, 50/60 Hz 26W Approx. 430 x 58 x 277 mm (16. 9 x 2. 3 x 10. 9 inches) without foot 3 kg 5 °C to 35 °C 5 % to 90 % Outputs VIDEO OUT: COMPONENT VIDEO OUT: HDMI OUT (video/audio): ANALOGUE AUDIO OUT: DIGITAL OUT (COAXIAL): DIGITAL OUT (OPTICAL): 1. 0 V (p-p), 75 , sync negative, RCA jack x 1 (Y) 1. 0 V (p-p), 75 , sync negative, RCA jack x 1 (Pb)/(Pr) 0. 7 V (p-p), 75 , RCA jack x 2 19 pin (HDMI standard, Type A) 2. 0 Vrms (1 kHz, 0 dB), 600 , RCA jack (L, R) x 1 0. 5 V (p-p), 75 , RCA jack x 1 3 V (p-p), Optical jack x 1 System Laser: Signal system: Frequency response: Signal-to-noise ratio: Harmonic distortion: Dynamic range: LAN port: Accessories: Semiconductor laser, wavelength: 405nm / 650 nm Standard PAL/NTSC colour TV system 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) More than 100 dB (ANALOGUE OUT connectors only) Less than 0. 008% More than 95 dB Ethernet jack x 1, 10BASE-T/100BASE-TX Video cable (1) Audio cable (1) Remote control (1) Batteries (2) Note: Design and specifications are subject to change without prior notice. 38 The unit's Audio Output Specifications Jack/ Setting Source Format Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD Linear PCM 2ch Linear PCM 5. 1ch Linear PCM 7. 1ch Jack/ Setting Source Format Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD Linear PCM 2ch Linear PCM 5. 1ch Linear PCM 7. 1ch Analogue Output Stereo PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch SPDIF (DIGITAL AUDIO OUT) *5 PCM Stereo PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch DTS Re-encode *3 *6 DTS DTS DTS DTS DTS DTS DTS DTS HDMI OUT PCM Stereo PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM Multi-Ch *3 PCM 5. 1ch PCM 7. 1ch PCM 7. 1ch PCM 5. 1ch PCM 5. 1ch PCM 2ch PCM 5. 1ch PCM 7. 1ch DTS Re-encode *6 DTS DTS DTS DTS DTS DTS DTS DTS Primary Pass-Thru *1, *2 Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD PCM 2ch PCM 5. 1ch PCM 7. 1ch *4 Primary Pass-Thru *1 Dolby Digital Dolby Digital Dolby Digital DTS DTS PCM 2ch PCM 2ch PCM 2ch Notes: *1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio. ) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. *3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option and [DTS re-encode] setting of the [SPDIF] option cannot be set together. [. . . ]