User manual LG BE06LU10

[. . . ] External Blu-ray Disc Rewriter (HD DVD-ROM Drive) English Français Español Português BE06LU10 CAUTION : The laser used in the External Blu-ray Disc Rewriter can damage your eyes. To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified service personnel. [. . . ] Please consult your graphics card vendor for proper driver solution. HDCP (High Bandwidth Digital Content Protection): Required to view pre-recoded Blu-ray Disc and HD DVD Disc which are copy protected. 3 Important precautions Follow these precautions when handling the drive or discs. Precautions Please note that the manufacturer of this equipment does not offer any warranty against data loss due to inappropriate installation, handling, direct or indirect damages. Please note that the manufacturer will bear no responsibility for direct or indirect damages (including lost data)caused by the use of this product or its malfunction. Please backup(copy) all important data as protection against data loss. Installation Avoid placing the drive in a location subject to: - high humidity - high temperature - mechanical vibration - direct sunlight Operation - excessive dust Don't move the drive suddenly from a cold place to warm one. Condensation may cause abnormal operation. Make sure to remove the disc before moving the drive to prevent the possible damage to the disc. Prevent foreign objects, such as liquids or metal, from entering the drive and in the case a foreign object enters the drive, please consult the dealer where the drive was purchased. Don't interrupt the electric power while the drive is operating. While drive is operating, don't move the drive or give a shock to the drive, since it can cause damages to the disc. Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. AC Adapter Don't plug in or remove the AC adapter using wet hands. Don't damage the AC adapter by scratching, modifying, or bending its prongs. Don't disassemble the AC adapter. Operation through a USB hub cannot be guaranteed. When connecting with USB1. 1 interface, picture and sound may be disrupted while watching DVD Video due to lack of data transfer speed. For smoother playback of DVDs, high-speed USB 2. 0 should be used. 4 Location and function of controls This following is the general figure of the design of the drive. The drive's appearance and specifications may change without prior notice. 1 2 3 4 5 6 1. Drive activity indicator The LED used to indicate the operation of External Blu-ray Disc Rewriter. USB Connector - This connector is used to connect to the USB converter cable. Power Connector - This connector is used to connect to the AC Power adapter cord. 5 Installation Hardware Installation Connecting to computer NOTES · Make sure you have a personal computer with an open USB port before connecting the drive to your computer. · Power for all device should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. Connect the USB converter cable to the External Drive. Connect the other end of the USB converter cable to your computer. Connect the AC adapter plug to the power connector at the rear of the drive. [. . . ] - For the sake of periodic improvements, specifications and appearance are subject to change without notice. - We have taken all possible measures to assure the quality of our products, but we cannot be responsible for the consequences if defect occurs. 11 Copyright © 2008 LG Electronics U. S. A. or http://www. lgusa. com LG Electronics Canada Inc. Ontario L4Z4G3 Canada LG Electronics Deutschland GMBH Jakob-Kaiser-Straße 12, D-47877 Willich, Germany LG Electronics U. [. . . ]