User manual LG BH100

[. . . ] Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture Industry Canada requirement This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC COMPLIANCE STATEMENT Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] · Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. 2 System Environment Operating Environment This unit can be operated in the system environment explained here. · CPU : Pentium D 3. 2 GHz or higher (Motherboard that supports SATA. ) · O/S : Windows XP (Home / Professional / Media Center Edition) with SP2/ Windows Vista (X86, X64) with SP1/ Windows 7 · RAM : 1GB or more · HDD : 30GB or more of available space (60GB for Blu-ray Disc authoring) Interface Serial ATA Drive bay 5. 25-inch half-height bay required Power +5V/+12V power socket required Recommended BD-R : LG, Mitsubishi Kagaku Media, Sony, Panasonic. media manufacturer BD-RE : Mitsubishi Kagaku Media, Maxell, Sony, Panasonic. DVD-R :Mitsubishi Kagaku Media, Taiyo Yuden. DVD+R : Mitsubishi Kagaku Media, Verbatim. DVD+RW : Mitsubishi Kagaku Media, Verbatim. DVD±R DL : Mitsubishi Kagaku Media, Verbatim. CD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim. System requirements * Compatibility problem in write/read function may occur with media depending on the media manufacturing quality. * There may be some cases when motion picture playback is not smooth depending on bit rate. * When using LightScribe Direct Disc Labeling on Windows Vista systems, please ensure Service Pack 1 or higher is installed. · Playing Blu-ray Disc Movies *NOTICE* Driver Graphic Card Interface HDCP *2 VGA (D-SUB) DVI or HDMI Not required Compliant Interface VGA (D-SUB) DVI or HDMI Monitor HDCP Not required Resolution Analog AACS *1 Compliant Digital 1024x768 or more (Recommended Compliant : 1920x1080) Due to copyright protection features, certain requirements must be met in order to playback BD movies on a computer. Discharge any static electricity on your person by touching the computer covers, etc. Removing the Computer Cover Make sure all peripheral devices of the computer and the computer itself are turned off, and then remove the cover. Refer to the manual for the computer for details about removing the cover. NOTE : There may be sharp edges inside the computer so take care to avoid injury. Mounting the Drive 1. Remove the a 51/4 drive bay panel from the computer. Refer to the manual for the computer for details. Do not apply excessive pressure to the cables inside the computer. If there is not much space behind the drive, connect the SATA and other cables before securing the drive. NOTE : This is a general installation guide. If your PC hardware appears different, please consult your hardware manual for installing peripheral devices. 5 PC Connection The Blu-ray Disc Rewriter connects to the motherboard of the host computer using a SATA interface cable. Power cable Power cable Data cable Data cable Connecting the SATA Power Cable Connect the power cable so the projection of the cable connector side to come to the left side. NOTE : Improper connection may damage the drive and void the warranty. Generally, the power connector can only fit one way. Red Connect to the power connector of the PC. Connecting the SATA Data Cable Connect the data cable. Be careful not to connect upside down. Connect to the SATA connector on the PC's Motherboard. 6 Device Drivers When using Windows XP SP2, Vista and Windows 7, no special device driver is required. [. . . ] Performance Data transfer rate BD-ROM : 359. 65 Mbits/s (10x max) *Sustained DVD-ROM : 22. 16 Mbytes/s (16x max) CD-ROM : 7, 200 kbytes/s (48x max) *Burst(ATAPI) SATA Gen. 1 (1. 5Gbps) Average Access BD-ROM : 180ms (typ. ), DVD-ROM : 160ms (typ. ) Time (1/3 Stroke) DVD-RAM : 180ms (typ. ), CD-ROM : 150ms (typ. ) Buffer capacity 4 Mbytes MTBF 100000 Power On Hours (Duty Cycle 20%) Environmental When operating Temperature: 5 °C to 45 °C Humidity: 15% to 80% R. H. Level When not operating Temperature: -30 °C to 60 °C Humidity: 10% to 90% R. H. Electrical Power DC 5V, DC 12V General Supported Discs *1 The disc of the cartridge type is not supported. BD-RE: The disc of version 1. 0 is not supported. [. . . ]