User manual LG BH7540TW

[. . . ] Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. [. . . ] I /f you charge the battery while iPod/ iPhone/iPad is extremely low in power, it may take longer to be charged. yy You may not control your iPod/iPhone/iPad from this unit due to malfunction of iPod/ iPhone/iPad. yy Depending on your iPod/iPhone/iPad’s software version, it may not be possible to control your iPod/iPhone/iPad from this unit. We recommend installing the latest software version. yy If you use an application, make a call, or send and receive SMS text message, etc. on iPod touch/iPhone/iPad, disconnect it from iPod/iPhone/iPad dock of this unit and then use it. yy If you have a problem with your iPod/ iPhone/iPad, please visit www. apple. com/ support. yy iPod touch, iPhone and iPad have any difference in operation other than iPod. You may need any additional control to use them with this unit. “slide to unlock”) yy Do not connect two iPad for charge at the same time. During playback, Press 2 Operating Skip During playback, press Y/ U to go to the next file or to return to the beginning of the current file. Playing less than 2 seconds, press Y to go to the previous file. Available Devices : Mobile phone, MP3, Laptop, PDA. Listening to Music of a Bluetooth Device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select the Bluetooth function by using the PFUNCTION or F. 2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “LG Docking (XX:XX)”. XX:XX means the last four digits of BT address. For example, if your unit has a BT address such as 9C:02:98:4A:F7:08, you will see “LG Docking (F7:08)” on your Bluetooth device. PIN code : 0000 Depending on the Bluetooth device type, some devices do not require a PIN code. 4. When this unit successfully is connected with your Bluetooth device, Bluetooth LED ( ) stop blinking. [. . . ] yy Check that the sound of the unit is muted. No sound. iPod/iPhone/iPad does not work. yy Connect iPod/iPhone/iPad to the unit correctly. yy Make sure that you are using Android system of version 4. 1 or later. yy Connect Android device to the unit correctly. yy The remote control is not pointed at the remote sensor of the unit. 3 Troubleshooting Audio is not output from your docked Android device. The remote control does not work properly. yy The remote control is too far from the unit. [. . . ]