User manual LG BP6000ER

[. . . ] WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. , Note HDMI [PCM Stereo] Select if you connect this unit's HDMI OUT jack to a device with two-channel digital stereo decoder. [PCM Multi-Ch] Select if you connect this unit's HDMI OUT jack to a device with multi-channel digital decoder. [DTS Re-Encode] Select if you connect this unit's HDMI OUT jack to a device with DTS decoder. [Primary Pass-Thru] Select if you connect this unit's HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder. 3 System Setting DRC (Dynamic Range Control) This function allows you to listen to a movie at a lower volume without losing clarity of sound. [On] Compress the dynamic range of the Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio output. [Auto] The dynamic range of the Dolby TrueHD audio output is specified by itself. And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode. y When [HDMI] option is set to [PCM MultiCh], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID. y If the [HDMI] option is set to [DTS ReEncode], the DTS Re-Encode audio is outputted for BD-ROM discs with secondary audio and the original audio is outputted for the other discs (like [Primary Pass-Thru]). , Note The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode. , Note BP690B-P. APRTLLK_ENG. indd 26 6/24/11 2:17 PM System Setting 27 DTS Neo:6 If the player is connected to the multi-channel Audio Receiver by HDMI connection, set this option to enjoy the multi-channel surround sound with the 2-channel audio source. [Off] Outputs the stereo sound via front speakers. [Music] Outputs the multi-channel sounds that are optimized for listening to music. [Cinema] Outputs the multi-channel sounds that are optimized for watching movie. [LOCK] Menu The [LOCK] settings affect only Blu-ray Disc and DVD playback. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. divx. com for more information on how to complete your registration. [Register] Displays the registration code of your player. [Deregister] Deactivate your player and display the deactivation code. [NETWORK] Menu The [NETWORK] settings are needed to use the software update, BD-Live and NetCast features. Connection Setting If your home network environment is ready to connect the player, the player needs to be set the wired network connection for network communication. (See "Connecting to your Home Network" on page 20. ) Connection Status If you want to check the network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection to the network and the internet have been established. All the downloaded videos from DivX VOD with this player's registration code can only be played back on this unit. , Note BP690B-P. APRTLLK_ENG. indd 28 6/24/11 2:17 PM System Setting 29 Auto Power Off The screen saver appears when you leave the player in Stop mode for about 5 minutes. If you set this option to [On], the unit automatically turns itself off after the Screen Saver is displayed for 5 minutes. Set this option to [Off ] to leave the screen saver until the unit is operated by the user. Initialize [Factory Set] You can reset the player to its original factory settings. [Blu-ray Storage Clear] Initializes the BD-Live contents from the connected USB storage. 3 System Setting If you reset the player to its original factory settings using [Factory Set] option, you have to set all the activation for the on-line services and network settings again. , Note Software [Information] Displays the current software version. [. . . ] Dolby and the double-D symbol are trademarks of Dolby Laboratories. 6 Appendix BP690B-P. APRTLLK_ENG. indd 49 6/24/11 2:17 PM 50 Appendix Audio Output Specifications Jack/Setting Source Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD Linear PCM 2ch Linear PCM 5. 1ch Linear PCM 7. 1ch PCM Stereo PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM Multi-Ch PCM 2ch PCM 2ch PCM 2ch PCM 5. 1ch PCM 7. 1ch PCM 2ch PCM 5. 1ch PCM 7. 1ch HDMI OUT DTS Re-encode *3 DTS DTS DTS (2ch) DTS DTS DTS DTS DTS Primary Pass-Thru *1 *2 Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD Linear PCM 2ch Linear PCM 5. 1ch Linear PCM 7. 1ch *1 The secondary and interactive audio may not be included in the output bitstream if [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec: the output always includes interactive and secondary audio. ) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. *3 If the [HDMI] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5. 1Ch. If the [HDMI] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BD-ROM discs, and the original audio is outputted for the other discs (like [Primary Pass-Thru]). [. . . ]