User manual LG BX327

[. . . ] OWNER'S MANUAL DLP PROJECTOR Please read this manual carefully before operating your set and retain it for future reference. BX327 www. lg. com DLP PROJECTOR Warning - Class B (b) For a Class B Digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] · · · 28 Function OPTION Menu Options Selecting Language 1. Then, move to OPTION with the , , , buttons and press the OK button. Press the , buttons to move to Menu Language and press the OK button. Move to a desired item with the , , , buttons and then press the OK button. · · On-Screen-Display (OSD) is displayed in the selected language. Press the BACK button to exit the menu screen. OPTION Menu Language Blank Image Screen Capture Lamp Mode Monitor Out Set ID Network Setting High Altitude 3D Mode : English : Blue : Normal : RGB1 :1 : Off Move OK Using Blank Function * This function may be effective if you need to get the attention of the audience during presentations, meetings or briefings. 1. Press the BLANK button on the remote control. · · The screen turns off to a background color. (Refer to `Selecting Blank image') 2. Press any button to cancel the blank function. · To temporarily turn off the lamp, press BLANK on the remote control. Do not block the projection lens with any objects when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire. Selecting Blank image 1. Then, move to OPTION with the , , , buttons and press the OK button. Press the , buttons to move to Blank Image and press the OK button. Move to a desired item with the , buttons and then press the OK button. OPTION Menu Language Blank Image Screen Capture Lamp Mode Monitor Out Set ID Network Setting High Altitude 3D Mode : English : Blue : Normal : RGB1 :1 : Off Move OK · Background image will be altered to the selected Blank function image. · If there is no Screen Captured, selecting Captured Image will display the Logo. · Press the BACK button to exit the menu screen. 29 Function Screen Capture Function 1. Then, move to OPTION with the , , , buttons and press the OK button. Press the , buttons to move to Screen Capture and press the OK button. · · · It can only be elected when there is an input signal. It takes up to 2 minutes when capturing screen. Press the BACK button to exit the menu screen. OPTION Menu Language Blank Image Screen Capture Lamp Mode Monitor Out Set ID Network Setting High Altitude 3D Mode : English : Blue : Normal : RGB1 :1 : Off Move OK To adjust the brightness of the screen Lamp mode 1. Press the Q. MENU button on the remote control. Press the , buttons to move to Lamp mode. [. . . ] - The frequent On/Off changes may cause the lamp function to deteriorate. * Don't pull out the power cord while activating the projector and the cooling fan. - It may cause the lamp life-span to shorten and get damaged. * The life-span of projector may considerably depend on the use environment and treatment conditions. [. . . ]