User manual LG C19A02D

[. . . ] Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. Do not use for many hours at extremely low or high temperature. [. . . ] · BLUE: This lead is for the power antenna connection. · BLUE/WHITE: This lead is for the remote amplifier on connection. · · · · BLACK: ORANGE: PINK: RED: 7 C Speaker Connections 1 2 3 4 5 6 7 8 REAR R FRONT R FRONT L REAR L Connecting to Auxiliary Equipment (Optional) Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary Equipment. FL (Front Left) FR (Front Right) RL (Rear Left) RR (Rear Right) To AUDIO OUT To AUDIO IN To AUDIO IN Amplifier Basic operation Turning the unit on Press MUTE/PWR (POWER/ on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold MUTE/PWR (POWER/ on the remote control). Insert a disc 1 2 Press to open the control panel. Draws the disc, and starts playback automatically. Eject a disc Press to open the control panel. The disc automatically ejects from the loading slot. When the disc is ejected by pressing during playback, it will be loaded automatically after 10 seconds unless you pull out disc from the unit. 8 Selecting a source Press SOURCE repeatedly to select a source. The indicator lights up in the following order. TUNER CD USB TUNER. . . Note You cannot select a source if is not ready. Adjusting the volume Rotate MUTE/PWR (Press VOLUME on the remote control) to adjust the sound level. Note When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level. Mute 1 2 Press MUTE/PWR (POWER/ To cancel it, press again. on the remote control) to cut the sound. Checking the clock You can see the clock pressing DISP (DISP. on the remote control). Changing the general settings 1 2 3 4 Press MENU (Press and hold MENU/SEL on remote control) so that one of menu items appears. Press the DRIVE/BAND repeatedly to select a band. The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM) i Auto Seek : Press I/i (?m m/M M?When a station is received, searching stops. i Manual Seek : Press and hold I/i (?m m/M M?on the remote control) until "MANUAL" appears, and then press it repeatedly. The frequencies move up or down step by step. Storing and recalling broadcast frequencies You can easily store up to 6 broadcast frequencies for later recall at the touch of a button. 1 Press DRIVE/BAND to select desired band you want to store. 3 Press one of preset buttons 1~6 and hold until the beep sound. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. [. . . ] In a WMA Content, information about the file (song title, performer name) is recorded. If there is no information, "NO TEXT" will be shown in the display window. Press DISP repeatedly during MP3/WMA/CD TEXT file playback. To go to a particular quickly (+10/-10 buttons) (If there is no folder or one folder. ) MP3 WMA U u Press U/AS (U on remote control) to skip to the next 10 track, and press u/PS (u on remote control) to skip to the previous 10 track. To skip to the next or previous folder (If there are more than two folders. ) MP3 WMA U u Press U/AS (U on remote control) to skip to the next folder, and press u/PS (u on remote control) to skip to the previous folder. Note Time display appearing on the display part when playing VBR file may vary and there may be some difference from actual time (both progress time and VBR are displayed at the same time when playing file). 14 USB operation If the plug length of the USB device is under 10mm, the USB device may not be correctly inserted or a connection failure may occur. Playing a USB device 1 2 Connect one end to the USB port on your USB device and then plug the other end into your unit's USB port. After "USB CHECK" appears, playback starts automatically. Note The method of files recorded in a USB memory device is the same as when using a DISC. Moving to another drive When connecting this unit to Multi reader, press DRIVE/BAND to go to the next drive. [. . . ]