User manual LG CE-20J3RX

[. . . ] In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Service Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer. Aerial Connect the aerial cable to the socket marked +75¥ on the back cover. For the best reception an outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. [. . . ] Also you can assign a station name with five characters to each programme number. Repeatedly press the MENU button to select the Station menu. Press the ¡ª/¡ button to select Manual programme. Press the OK button to display the Manual programme menu. Option : In some models, the display System L or DK (BG or I) appears. In that case, press the ¡ª/¡ button to select System then select your local TV system with the ¢, /¢"button. : SECAM L/L'(France) : PAL D/K, SECAM D/K (East Europe) : PAL B/G, SECAM B/G (Europe/East Europe) : PAL I/II (U. K. /Ireland) Press the ¡ª/¡ button to select Channel. Press the ¢, /¢" button to select V/UHF or Cable as required. Press the ¡ª/¡ button to select Search. Press the ¢, /¢" button to commence searching. If a station is found the search will stop. Repeat the `Manual programme tuning' steps 6 to 7. Press the TV/AV button to return to normal TV viewing. The finely tuned programme will be indicated by yellow number during programme selection. Calling the programme table You can check the programmes stored in the memory by displaying the programme table. Displaying programme table Press the PR. LIST button to display the Programme table. They are skipped during auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. Selecting a programme in the programme table Select a programme with the ¡ª/¡ or ¢, /¢"button. The set switches to the chosen programme number. Paging through a programme table There are 10 programme table pages in which contain 100 programmes. Pressing the ¡ª/¡ or ¢, /¢"button repeatedly turns the pages. [. . . ] Press the INDEX button to select the index page. Press the NUMBER or ¡ª/¡ button to select a teletext page. Programming a colour button in LIST mode If the TV is in SIMPLE text, TOP text or FASTEXT, press the MODE button to switch to LIST mode. Press the NUMBER, ¡ª/¡ or four coloured buttons to select a teletext page. Using the NUMBER buttons, select the page you wish to programme. [. . . ]