User manual LG CED-8083B

[. . . ] )y Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Not using the Desk Type stand Only 32/42LM340*, 47CM96** 1 Push the supplied Protection cover into the opening at the bottom of the TV until clicking sound. NOTE Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. Protection Cover A-6 SETTING UP THE TV Tidying cables Only 42/47/55LM615*, 32/42/47LM585* 1 Use Cable Management to neatly secure and position cables together 2 Fix the Cable Management firmly to the TV. [. . . ] Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” W  hen applying the RF Isolator, a slight loss of signal sensitivity can occur. Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buying these items. These devices only work with certain models. AG-F2**, AG-F3**, AG-F4** Cinema 3D Glasses Compatibility AG-F2**, AG-F3**, AG-F4** Cinema 3D Glasses 32/37/42/47/55LM61**, 32/42/47LM58**, 32/42LM34**, 47CM96** 32/37/42/47LS56** • The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. 16 ASSEMBLING AND PREPARING Parts and buttons A type : 32/37/42/47/55LM61**, 32/42/47LM58**, 32/42LM340*, 32/37/42/47LS56** Screen B type : 47CM96** buttons ENGLISH ENG Screen Remote control and intelligent sensors1 Power indicator Speakers Touch buttons2 OK SETTINGS INPUT OK Speakers Remote control and intelligent sensors1 Power indicator SETTINGS INPUT C type : 42LM345* Screen buttons OK OK SETTINGS INPUT Speakers Remote control and intelligent sensors1 Power indicator SETTINGS INPUT buttons H H Description Scrolls through the saved programmes. Accesses the main menu, or saves your input and exits the menus. OK SETTINGS INPUT /I 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 A type buttons are touch sensitive and can be operated through simple touch with your finger. NOTE yy You can set the power indicator light to on or off by selecting OPTION in the main menus. ASSEMBLING AND PREPARING 17 Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. -- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. Y y (Only 42/47/55LM615*, 32/42/47LM585*) M4 x 8 2EA <Rear> <Front> WARNING yy To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. ASSEMBLING AND PREPARING 19 Securing the TV to a wall (This feature is not available for all models. ) Using the Kensington security system (This feature is not available for all models. ) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit . Connect the Kensington security system cable between the TV and a table. ENGLISH ENG 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. [. . . ] Optical Digital Audio Out is not available yy when connecting a headphone. Yy When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART cable. (Only 3D models) yy If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed. This feature is not available in all countries. [. . . ]