User manual LG CF-21D20B

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. REGULATORY INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Press the G button and then use the band level. Press the ENTER button to save. D /E D /E /E button to select the Sound menu. button to select EZ Audio. Then, use D /E F / G button button to adjust AVL (Auto Volume Leveler) Volume - AVL maintains an equal volume level automatically even if the channel is changed. 1. Press the MENU button and then use D / E button to select the Sound menu. 2. Press the ENTER button to save. D /E D /E button to select A VL. button to to select On or Off. Sound EZ Audio AVL Balance On Off D F E OK MENU 19 Operation Sound Menu Options continued Sound Balance 1. Press the MENU button and then use D / E button to select the Sound menu. 2. Press the G button and then use D /E /G button to select Balance. button to adjust the sound balance. 3. Press the G button and then use F Sound EZ Audio AVL Balance 0 · Balance is adjustable from Left 50 to Right 50. Press the ENTER button to save. D FG E OK MENU Stereo/SAP Broadcasts Setup - The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program, if the broadcaster transmits an additional sound signal as well as the original one. Press the G G D /E D /E button to set the hour. button to set the minutes. D FG E 5. For On timer function only: Press the G button and then use D / E button to set the channel at turn-on. Then, press the G button and then use D / E button to set the turn-on sound level. Press the G OK MENU button and then use D /E button to select Run or Hold. · Hold: Off timer/On timer will not work. Press the ENTER button to save. Sleep Timer Setup - The Sleep Timer turns the TV off at a preset time. Press the SLEEP button repeatedly to select the number of minutes. First the Sleep --- option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected. To check the remaining minutes before the TV turns off, press the SLEEP button once. [. . . ] You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Green : 0 ~ Red: 64 · Refer to `Real data mapping 1'. Acknowledgement [j][ ][Set ID][ ][OK][Data][x] 15. Channel Add/Del (Command:m b) G To add and delete the channels. [. . . ]