User manual LG CI-29H40

[. . . ] has determined that this product meets the ENERGY STAR guidelines for energy efficiency. www. lgusa. com / www. lg. ca WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] (Default = No) I When to display the reminder screen, choices are 30 seconds to 15 minutes early, to 30 seconds to 15 minutes I late, to On time. (Default = 1 min early) Highlight Remind Defaults, and press the M E N U button to display the Remind Defaults menu. Highlight Go to Service Bar to close the menu, change no information, and return to the Setup Service Bar. When finished, press ENTER button to highlight Done. Press ENTER button again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted option. 69 TV GUIDE ON SCREEN SYSTEM TM Record And Remind Features Record You can set a show to Record in Listings, Search, and Schedule or change Record settings for a show in Schedule. There are 3 ways to set a show to Record: Using the Record Button on the Remote I Press the Record button on the remote to record the show Once with current default settings (Start and End recording On Time). Each time you press the Record button, you can change the record frequency (but not the default settings) among Once (default), Regularly, Weekly and then Cancel. SIMP LINK 70 TV GUIDE ON SCREEN TM SYSTEM NOTE The proper Record icon appears on the show tile, as the Record button is pressed. Once - Records the show one time. Regularly - Records the show every time the show airs on the same channel and starts at the same time. Weekly - Records the show each time the show airs on the same day of the week, on the same channel and starts at the same time. Cancel (no icon displayed) - Does not record. From a Panel Menu 1 Highlight a show, and press M E N U button to display the Episode Options menu. 2 Highlight Set Recording, and press ENTER button to display the Record Options menu. 3 Highlight the Frequency option, and use the left and right arrows to choose among Once, Regularly, Weekly, and Off, as previously described. Select one of these options: I Record anyway - This show will override an existing show set to Record or auto-tune. I Don't record this show - Cancel the Recording. Remind You can set a show Reminder in Listings, Search, and Schedule or change Reminder settings for a show in Schedule. There are 2 ways to set a show Reminder: From a Panel Menu 1 2 3 Highlight a show, and press Menu button to display the Episode Options menu. Highlight Set Reminder, and press ENTER button to display the Remind Options menu. Highlight the Frequency option, and use the left and right arrows to choose between: Once - Sets a show reminder one time. Regularly - Sets a show reminder every time the show airs on the same channel and starts at the same time. Weekly - Sets a show reminder each time the show airs on the same day of the week, on the same channel and starts at the same time. Off - Keeps the show in the list but will not remind until the frequency is changed. TV GUIDE ON SCREEN TM SYSTEM 4 5 Power On the TV, if Off, when a Reminder is scheduled. (Default = No) Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. (Default =No) When to display the reminder screen. Choices are 30 seconds to 15 minutes early, to 30 seconds to 15 minutes late, to On time. [. . . ] Low Power (Command2:q) To control the low power function on/off. Transmission [ j ][q][ ][Set ID][ ][Data][Cr] Data 0: low power off 1: low power on Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] 26. Orbiter Time Setting (Command2:r) To adjust orbiter operation time term. Transmission [ j ][r][ ][Set ID][ ][Data][Cr] Data Min: 1~ Max: FE(*transmit by Hexadecimal code) Unit: Second Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 27. [. . . ]